No edit summary |
No edit summary |
||
Line 7: | Line 7: | ||
#Remove the motors, replace the mechanical pulley system with electromagnets to move the belt up and down. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:51, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:53, 1 December 2015 (PST) | #Remove the motors, replace the mechanical pulley system with electromagnets to move the belt up and down. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:51, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:53, 1 December 2015 (PST) | ||
#To make it safer, remove the hotend and print with foam (or other low temp materials)[[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:32, 3 December 2015 (PST) | #To make it safer, remove the hotend and print with foam (or other low temp materials)[[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:32, 3 December 2015 (PST) | ||
#Subtractive 3D printing with syringe from gel [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:34, 3 December 2015 (PST) |
Revision as of 15:34, 3 December 2015
Bllafata (talk) 07:17, 1 December 2015 (PST) WayneHelminen (talk) 07:19, 1 December 2015 (PST)
- Smart slicing based on the printer, uploading the model to the printer should slice and create the gcode locally. Bllafata (talk) 07:53, 1 December 2015 (PST)
- Remove print head and use concentrated sunlight on a powder/gel to build the print WayneHelminen (talk) 07:52, 1 December 2015 (PST) Bllafata (talk) 07:32, 3 December 2015 (PST)
- Remove the motors, replace the mechanical pulley system with electromagnets to move the belt up and down. Bllafata (talk) 07:51, 1 December 2015 (PST) WayneHelminen (talk) 07:53, 1 December 2015 (PST)
- To make it safer, remove the hotend and print with foam (or other low temp materials)Bllafata (talk) 07:32, 3 December 2015 (PST)
- Subtractive 3D printing with syringe from gel WayneHelminen (talk) 07:34, 3 December 2015 (PST)