No edit summary |
No edit summary |
||
Line 5: | Line 5: | ||
1) Improving resolution : Reducing thickness of the extruder nozzle. | 1) Improving resolution : Reducing thickness of the extruder nozzle. | ||
2)Improve Print speed : | 2) Improve Print speed : Using high rpm , yet easy to control motors. | ||
3) enhance material availability: | |||
4) reduce parts of the printer: use less infill amount and make the base wide and decrease the top dimension. make something like a conical printer. | |||
5)reduce costs of printer (free) : Make all printed parts. The pulley , bearing , and all metal parts that can be printed should be printed. | |||
6)enable auto calibration : Using sensors installed on nozzle , that can measure the zmax. | |||
7) Quieter printing : Use covering for motors that is 3 D printed. | |||
8) Make it safer : Make the printer glass covered , so that the hot end cannot be reached by children. | |||
9) Make Real Time feedback : | |||
10) Print bigger : Increase the printer radius, keeping the top dimensions same. | |||
11)Make it smell good: Use some parts of sandalwood , instead of normal wood. | |||
12) Ubiquitous printing Nozzle should be able to print in all the angles. It should be able to rotate in 360 degrees. | |||
13) Use less energy : the hot end should change the temperature by itself with speed. |
Revision as of 15:53, 1 December 2015
Add
07:29, 1 December 2015 (PST)user: Dhwani
Innovation : By moving to a new dimension.
1) Improving resolution : Reducing thickness of the extruder nozzle.
2) Improve Print speed : Using high rpm , yet easy to control motors.
3) enhance material availability:
4) reduce parts of the printer: use less infill amount and make the base wide and decrease the top dimension. make something like a conical printer.
5)reduce costs of printer (free) : Make all printed parts. The pulley , bearing , and all metal parts that can be printed should be printed.
6)enable auto calibration : Using sensors installed on nozzle , that can measure the zmax.
7) Quieter printing : Use covering for motors that is 3 D printed.
8) Make it safer : Make the printer glass covered , so that the hot end cannot be reached by children.
9) Make Real Time feedback :
10) Print bigger : Increase the printer radius, keeping the top dimensions same.
11)Make it smell good: Use some parts of sandalwood , instead of normal wood.
12) Ubiquitous printing Nozzle should be able to print in all the angles. It should be able to rotate in 360 degrees.
13) Use less energy : the hot end should change the temperature by itself with speed.