No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
{{777}}{{TRIZ-3D}}[[category:4777 TRIZ 3D printers]] | {{777}}{{TRIZ-3D}}[[category:4777 TRIZ 3D printers]] | ||
[[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use stronger belts to reduce backlash from elasticity in belt [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use Lead screws and anti backlash nuts to reduce backlash in axes [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Self leveling probe to know where bed is relative to extruder [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Removable bed that can be automatically replaced to allow autonomous printing [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use Resin based hologram for instant 3d printing [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Power detection and battery backup for continuing print after power loss [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use laser to melt filament faster for fdm printing [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use linear advance firmware to print more accurately through corners and when changing directions [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use higher temperature hotend parts to allow for printing in engineering grade polymers [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use an extrusion screw system to allow printing from granules and waste [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use a dual extrusion screw extruder to mix in compounds and create composite parts [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Build printer using high strength, rigid parts to reduce frame ringing and flexing [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Move the bed relative to the extruder when printing with heavy extruders [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Make a 5 axis 3D printer to allow for printing upside down and on sides of part, removes need for support [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use liquid nitrogen to shock parts off print bed when done [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Use plow to remove parts from bed [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Connect printer to wifi and allow starting and removing of prints automatically [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Filament changer with unlimited colors and materials [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Tool Changer for different extruders [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Mill Attachment for milling to exact size after printing [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Tool Head for automatically adding vitamins to parts [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Circuit printer for automating parts right off print bed [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Paste extruder for printing viscous materials [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Automatic Print head cleaner [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
# Build a chamber around build plate to keep heat and particles in [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:09, 4 December 2018 (PST) | |||
[[User:Mmandres|Mmandres]] ([[User talk:Mmandres|talk]]) 07:19, 1 December 2015 (PST) | [[User:Mmandres|Mmandres]] ([[User talk:Mmandres|talk]]) 07:19, 1 December 2015 (PST) | ||
Revision as of 15:09, 4 December 2018
Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use stronger belts to reduce backlash from elasticity in belt Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use Lead screws and anti backlash nuts to reduce backlash in axes Alwoern (talk) 07:09, 4 December 2018 (PST)
- Self leveling probe to know where bed is relative to extruder Alwoern (talk) 07:09, 4 December 2018 (PST)
- Removable bed that can be automatically replaced to allow autonomous printing Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use Resin based hologram for instant 3d printing Alwoern (talk) 07:09, 4 December 2018 (PST)
- Power detection and battery backup for continuing print after power loss Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use laser to melt filament faster for fdm printing Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use linear advance firmware to print more accurately through corners and when changing directions Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use higher temperature hotend parts to allow for printing in engineering grade polymers Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use an extrusion screw system to allow printing from granules and waste Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use a dual extrusion screw extruder to mix in compounds and create composite parts Alwoern (talk) 07:09, 4 December 2018 (PST)
- Build printer using high strength, rigid parts to reduce frame ringing and flexing Alwoern (talk) 07:09, 4 December 2018 (PST)
- Move the bed relative to the extruder when printing with heavy extruders Alwoern (talk) 07:09, 4 December 2018 (PST)
- Make a 5 axis 3D printer to allow for printing upside down and on sides of part, removes need for support Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use liquid nitrogen to shock parts off print bed when done Alwoern (talk) 07:09, 4 December 2018 (PST)
- Use plow to remove parts from bed Alwoern (talk) 07:09, 4 December 2018 (PST)
- Connect printer to wifi and allow starting and removing of prints automatically Alwoern (talk) 07:09, 4 December 2018 (PST)
- Filament changer with unlimited colors and materials Alwoern (talk) 07:09, 4 December 2018 (PST)
- Tool Changer for different extruders Alwoern (talk) 07:09, 4 December 2018 (PST)
- Mill Attachment for milling to exact size after printing Alwoern (talk) 07:09, 4 December 2018 (PST)
- Tool Head for automatically adding vitamins to parts Alwoern (talk) 07:09, 4 December 2018 (PST)
- Circuit printer for automating parts right off print bed Alwoern (talk) 07:09, 4 December 2018 (PST)
- Paste extruder for printing viscous materials Alwoern (talk) 07:09, 4 December 2018 (PST)
- Automatic Print head cleaner Alwoern (talk) 07:09, 4 December 2018 (PST)
- Build a chamber around build plate to keep heat and particles in Alwoern (talk) 07:09, 4 December 2018 (PST)
Mmandres (talk) 07:19, 1 December 2015 (PST)
- Self leveling bed for better print quality Mmandres (talk) 07:38, 1 December 2015 (PST)
- less power by adjustable power consumption(turning off unnecessary components)Mmandres (talk) 07:38, 1 December 2015 (PST)
- adjustable shell to allow for more shapes to printedMmandres (talk) 07:38, 1 December 2015 (PST)
- allow the hot end to swivel for better resolutionMmandres (talk) 07:38, 1 December 2015 (PST)
- adding a Hygrometers to adjust level based on humidityMmandres (talk)
- change filament type to a liquid so more movement in feeder lineMmandres (talk) 07:38, 1 December 2015 (PST)
- add sensors to find zmaxMmandres (talk) 07:38, 1 December 2015 (PST)
- add sensors to be able to level bed and find radiusMmandres (talk) 07:38, 1 December 2015 (PST)
- make bed rotatable to allow for changing working direction of printMmandres (talk) 07:38, 1 December 2015 (PST)
- make hot end area flexible so can get around parts to print at different anglesMmandres (talk)
- use adjustable length connecting rods for faster printingMmandres (talk) 07:49, 1 December 2015 (PST)
- make printer modular so can expand to print bigger itemsMmandres (talk) 07:49, 1 December 2015 (PST)
- add many hot ends that can be switched in and out to allow for different sizesMmandres (talk) 07:49, 1 December 2015 (PST)
- add imaging technology to automatically adjust feed rate based on printMmandres (talk) 07:49, 1 December 2015 (PST)
- add imaging technology to automatically adjust temperature based on printMmandres (talk) 07:49, 1 December 2015 (PST)
- add imaging technology to automatically stop on part screw upMmandres (talk) 07:49, 1 December 2015 (PST)
- add more input types so more than a computer can control printerMmandres (talk) 07:51, 1 December 2015 (PST)
- multiple print heads Mmandres (talk) 06:43, 3 December 2015 (PST)
- make the printer foldable for easy portabilityMmandres (talk) 06:43, 3 December 2015 (PST)
- add a combiner so many filament rolls can be ready to go but printer only uses one Mmandres (talk) 06:43, 3 December 2015 (PST)
- make apexes flexible so can bent out of way to make getting print off easier Mmandres (talk) 06:43, 3 December 2015 (PST)
- make the cables retractable for easy cord management Mmandres (talk) 06:50, 3 December 2015 (PST)
- make the printer be able to print with any substance Mmandres (talk) 06:50, 3 December 2015 (PST)
- print with multiple types of filaments at once Mmandres (talk) 06:50, 3 December 2015 (PST)
- make a movable bed so can do more than one print on a bed without removing old print Mmandres (talk) 06:50, 3 December 2015 (PST)