No edit summary |
No edit summary |
||
| Line 13: | Line 13: | ||
#Printers hooked up in parallel to print large parts together. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:44, 1 December 2015 (PST) | #Printers hooked up in parallel to print large parts together. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:44, 1 December 2015 (PST) | ||
#Reduce waste by reducing the number of failed prints due to poor bed adhesion by having a quick adhesion test before long prints [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 06:59, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:01, 3 December 2015 (PST) | #Reduce waste by reducing the number of failed prints due to poor bed adhesion by having a quick adhesion test before long prints [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 06:59, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:01, 3 December 2015 (PST) | ||
#Reduce parts by reducing a 3D printer to a pen-like device where you manually control the extrusion of the material. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:02, 3 December 2015 (PST) | |||
Revision as of 15:02, 3 December 2015
Bllafata (talk) 07:17, 1 December 2015 (PST) WayneHelminen (talk) 07:18, 1 December 2015 (PST)
- Ants with print heads on them Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
- Print with colonies of ants Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
- Independent print heads for different materials Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
- Breakup the parts of the printer so that it is locally sourced "junk" Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
- Tablet interface, click on picture form online repository and it auto downloads, slices, and sends the gcode to the printer. Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
- Nanobots that mate with nanobots of the connecting part WayneHelminen (talk) 07:44, 1 December 2015 (PST)
- Nanobots that maintain the integrity of the machine WayneHelminen (talk) 07:44, 1 December 2015 (PST)
- Part picker and 3D printer in one that places electrical components in desired locations as the print is madeBllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
- Gather "lost" energy on indiviudal parts, i.e. heat exchanger on hotend to heat water to steam and power a small turbine to recoup some of that loss. Also attach with motors since those can get hot as well. Bllafata (talk) 07:49, 1 December 2015 (PST) WayneHelminen (talk) 06:52, 3 December 2015 (PST)
- Printers hooked up in parallel to print large parts together. Bllafata (talk) 07:44, 1 December 2015 (PST)
- Reduce waste by reducing the number of failed prints due to poor bed adhesion by having a quick adhesion test before long prints Bllafata (talk) 06:59, 3 December 2015 (PST) WayneHelminen (talk) 07:01, 3 December 2015 (PST)
- Reduce parts by reducing a 3D printer to a pen-like device where you manually control the extrusion of the material. Bllafata (talk) 07:02, 3 December 2015 (PST)