FrankBeFay (talk | contribs) |
Fionaconnor (talk | contribs) No edit summary |
||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
{{OpenKhowHowManifest | |||
|manifest-date-updated=2020-06-04 | |||
|manifest-author-name=Kathy Nativi | |||
|manifest-author-affiliation=Appropedia | |||
|title=Mirco Lathe | |||
|description=Preliminary design page for [[Micro Lathe]] | |||
|intended-use=industry | |||
|keywords=3D printing, lathe, machinery, symmetric cutting, sanding, painting | |||
|contact-appropedia-user=User:FrankBeFay | |||
|image=MicroLathe.jpg | |||
|development-stage=prototype | |||
|made=Yes | |||
|made-independently=Yes | |||
|manifest-language=eng | |||
|documentation-language=eng | |||
|sustainable-development-goal=Sustainable Development Goal 9 | |||
|manifest-autho-email=info@appropedia.org | |||
}} | |||
{{777}} | |||
<!--infobox--> | |||
<!--end infobox--> | |||
==Micro Lathe== | ==Micro Lathe== | ||
Created by [[User:FrankBeFay|FrankBeFay]] | Created by [[User:FrankBeFay|FrankBeFay]] | ||
{{Statusboxtop}} | {{Statusboxtop}} | ||
{{status-design}} | {{status-design}} | ||
{{Status-Model}} | |||
{{status-prototype}} | {{status-prototype}} | ||
{{boxbottom}} | {{boxbottom}} | ||
Revision as of 22:30, 25 June 2020
Micro Lathe
Created by FrankBeFay Template:Statusboxtop Template:Status-design
Template:Status-Model Template:Status-prototype Template:Boxbottom
Abstract
- This OSAT is a Micro Lathe. While in Beta, it is nearly parametric in order to scale to the supplies on hand, and can be altered to meet the needs of the end user.
- A complete frame (Version 1) can be seen to the right
Bill of Materials
To Be Determined
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
Skills and Knowledge Necessary to Make the OSAT
- There is no special skills needed to make this tool.
Technical Specifications and Assembly Instructions
- If any changes to the design want to be done, open the FreeCAD file and adjust the parameters.
- Slicing instructions
- Fill % = 25
- Speed = 70 mm/sec
- Layer Height = .25 mm
- Support Needed for Cross Slide
- Print time with above settings will be 24+ hours