Connection problem
If you are not able to see your AthenaII web page, it might be a USB-Ethernet converter problem. Make sure you have correct software drivers installed, or try a different USB-Ethernet converter.
Orange Pi network problem
There is a way to check if an Orange Pi board works properly.
- Connect Orange Pi to USB port via USB-miniUSB cable
- Open any serial communication software (Arduino IDE would work just fine)
- SSH to your board through the serial monitor (it would work in the same way as the command terminal)
ssh -v debian@192.168.76.2
SSH Secure Shell with Arduino serial monitor (Arduino IDE):
Franklin feedback
To be able to see Franklin process responses during printing you can SSH to the Orange Pi board via Ethernet or via serial monitor:
ssh -v debian@192.168.76.2
Show all active processes:
ps -A
To stop Franklin:
sudo kill _process_id_ [example: sudo kill 1230]
To restart Franklin:
franklin
Then you will see responses from "franklin" process in command line terminal or in serial monitor: