User:Ian-laurel/sandbox ECSACONM ModuleSimulatorBuild

▼This page is part of the ECSACONM Training Modules initiative by ECSACONMPlease see the Intuitive Foundation Terms of Use. Do not edit this page without permission from ECSACONM.

▼Developer InstructionsThis page provides instructions to build a physical simulator for training. It is divided into three main parts: a description of the simulator, a table of materials required (including the simulated tissue), and detailed build instructions.

▼Developer InstructionsIn 1–2 paragraphs, describe the simulator. What is it designed to simulate? What layers or components are included? What skills does it support?

▼Developer InstructionsList all components needed to build the simulator. Indicate what each item simulates (e.g., skin, bone, vessel) and where it can be sourced. Add additional rows as needed.

▼Developer InstructionsFollow these step-by-step instructions to assemble your simulator. You may include annotated images or videos. Use a consistent step format for clarity.

Annotations:

Step-by-step walkthrough

• 0:00 Introduction
• 0:15 Step 1 – Prepare base layer
• 0:30 Step 2 – Add foam skin
• 0:50 Step 3 – Embed tubing

• 
  1. Step-by-step example
• 
  2. CPAP setup
• 
  3. Alternate airway example

Prepare a flat surface using cardboard or acrylic as the base. Cut it to a size that fits the desired practice area.

Use adhesive spray or double-sided tape to affix foam to the base. Trim any excess. This forms the "skin" layer.

Place tubing or other components according to the procedure you're replicating. Secure with tape or embedded channels as needed.

[[Part of::ECSACONM Training Modules]]
[[Type::Simulator]]
[[Skill phase::Construction]]
[[Has order::1]]