Two-part-end-effector
The installation of the basic end effector can be difficult and tedious. This two part end effector simplifies the process of making the printer.
Original Author: User:Amcmichael
Design and Printing
[edit | edit source]Design
[edit | edit source]OpenSCAD was utilized for all modeling operations. The MOST-Athena GitHub file repository is located here.
See also
[edit | edit source]| Authors | |
|---|---|
| License | CC-BY-SA-3.0 |
| Cite as | Amcmichael (2016–2025). "Two-part-end-effector". Appropedia. Retrieved June 24, 2026. |