Combined display of all available logs of Appropedia. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 22:52, 12 February 2016 LGMarshall talk contribs uploaded a new version of File:LGMarshallAvatar.jpg (I took this picture.)
- 20:59, 11 February 2015 LGMarshall talk contribs uploaded a new version of File:RecrystallizedPETThreads 160C.jpg (Cropped the top black section out of the image.)
- 20:57, 11 February 2015 LGMarshall talk contribs uploaded a new version of File:RecrystallizedPET DualSection140C.jpg (Reverted to version as of 20:41, 11 February 2015 Incorrect file replaced)
- 20:55, 11 February 2015 LGMarshall talk contribs uploaded a new version of File:RecrystallizedPET DualSection140C.jpg (Cropped to allow for a smaller image, by removing the large empty balck space at the top.)
- 20:41, 11 February 2015 LGMarshall talk contribs uploaded File:RecrystallizedPET DualSection140C.jpg (I took this picture of a top part of a PET water bottle which was heated to 140°C, and kept there for around 2 hours. The length of time was to ensure that the whole sample reached the same temperature, rather than the thin wall sections warm up to 14...)
- 20:27, 11 February 2015 LGMarshall talk contribs uploaded File:RecrystallizedPETThreads 160C.jpg (I took this picture of some recrystallized PET bottle threads. The recrystallized sections are opaque and white, while the amorphous wall pieces can still be seen in some areas.)
- 17:06, 6 November 2014 LGMarshall talk contribs uploaded File:PETBottleM4 1.jpg (Carefully insert the tops of the bottles into the wood chippers. Never put your hands inside the wood chipper. I took this picture.)
- 19:07, 4 November 2014 LGMarshall talk contribs uploaded File:PETBottleM3 3.jpg (Cut the halves now, so that you have 4 quarters of the bottle. I took this picture.)
- 19:06, 4 November 2014 LGMarshall talk contribs uploaded File:PETBottleM3 2.jpg (Cut the bottle into two halves. The base may be difficult to cut, as it is much thicker. I took this picture.)
- 19:05, 4 November 2014 LGMarshall talk contribs uploaded File:PETBottleM3 1.jpg (I took this picture. Cut the top of the bottle off.)
- 23:42, 1 November 2014 LGMarshall talk contribs uploaded File:PETBottleM2 1.jpg (I took this picture. It is a Gatorade bottle.)
- 23:42, 1 November 2014 LGMarshall talk contribs uploaded File:PETBottleM1 4.jpg (I took this picture. It is a Gatorade bottle.)
- 23:42, 1 November 2014 LGMarshall talk contribs uploaded File:PETBottleM1 3.jpg (I took this picture. It is a Gatorade bottle.)
- 23:40, 1 November 2014 LGMarshall talk contribs uploaded File:PETBottleM1 2.jpg (I took this picture. It is a Gatorade bottle.)
- 23:40, 1 November 2014 LGMarshall talk contribs uploaded File:PETBottleM1 1.jpg (I took this picture. It is a Gatorade bottle.)
- 03:22, 22 October 2014 LGMarshall talk contribs uploaded File:WaterBottleSticker.jpg (I took the picture.)
- 00:16, 10 October 2014 LGMarshall talk contribs uploaded File:RecycleBotMOST Wiring.jpg (I took this picture. It shows a functional layout of wires on the MOST RecycleBot)
- 00:05, 10 October 2014 LGMarshall talk contribs uploaded File:RecycleBotMOST Software Startup.jpg (I took this image)
- 15:59, 18 September 2014 LGMarshall talk contribs uploaded a new version of File:LGMarshallAvatar.jpg
- 21:41, 26 August 2014 LGMarshall talk contribs uploaded File:ImprintAlHand.jpg (I took this picture. An imprint of a hand in sand. Shows the finish from common sand left, and the defects apparent.)
- 21:39, 26 August 2014 LGMarshall talk contribs uploaded a new version of File:3DPrintPLAEvapAlOwls.jpg (I took this picture. A 3D printed PLA cuddling owl model from: http://www.thingiverse.com/thing:50212 Evaporatively cast in sand.)
- 21:37, 26 August 2014 LGMarshall talk contribs uploaded File:3DPrintPLAEvapAlOwls.jpg (A 3D printed PLA cuddling owl model from: http://www.thingiverse.com/thing:50212. Cast using evaporative casting in sand.)
- 23:32, 25 August 2014 LGMarshall talk contribs uploaded File:LGMarshallAvatar.jpg (Lewis Marshall's profile picture.)
- 19:01, 25 August 2014 User account LGMarshall talk contribs was created