SELF/Perioperative Nursing/Laparoscopy Setup/Laparoscopy Setup Cumulative Assessment

▼This page is a part of the Perioperative Nursing Curriculum by ECSACONM and SELFPlease see the Intuitive Foundation Terms of Use and do not edit without permission.

Use the quiz below to check your understanding of the material.

Instructions

Work through each question carefully to choose the best answer, and submit the quiz to view your results. After completing the quiz, read through the answer explanations to review the reasoning behind both correct and incorrect options.

Return to main

During setup for a laparoscopic procedure, the surgeon requests a 30° laparoscope. What is the primary advantage of this scope compared with a 0° laparoscope?

	It produces a brighter image under identical lighting conditions
	It allows larger instruments to pass through smaller trocars
	It allows the viewing direction to be changed by rotating the scope while maintaining the same trocar position
	It eliminates the need for white balancing before surgery

A laparoscopic tower has been fully assembled, but the circulating nurse notices several cables crossing a main walkway. Why should this be corrected before the patient enters the operating room?

	Crossed cables reduce monitor resolution
	Poor cable routing increases the risk of accidental disconnection, trip hazards, and disruption of the sterile workflow
	Crossing cables interferes with carbon dioxide flow
	It prevents white balancing from being completed correctly

While preparing equipment, a scrub nurse discovers that a monopolar hook is incompatible with the selected energy platform. What is the safest response?

	Replace the incompatible instrument with one designed for the selected energy system before surgery begins
	Use the instrument if it appears to fit the connector securely
	Wait until the surgeon requests the instrument before deciding whether it can be used
	Increase the generator output to compensate for the incompatibility

During surgery, the operative image gradually develops a yellow tint, although focus remains sharp. Which component should be assessed first?

	The insufflation tubing
	The trocar seals
	The irrigation system
	The light source and fibreoptic light cable

A circulating nurse prepares a second clip applier before it is requested during a complex laparoscopic procedure. What is the main reason for this practice?

	To reduce the number of instruments that require cleaning afterward
	To allow both clip appliers to be used simultaneously
	To minimize interruption if the primary device malfunctions or becomes unavailable
	To avoid documenting the first device after surgery

During equipment preparation, the insufflator repeatedly alarms before patient entry despite an adequate gas supply. What is the most appropriate next step?

	Replace the CO₂ cylinder immediately
	Systematically inspect the tubing, filters, and connections before assuming equipment failure
	Increase the planned operating pressure
	Disconnect the alarm function until surgery begins

Which action best demonstrates effective anticipation during laparoscopic instrument management?

	Waiting until the surgeon verbally requests every instrument before preparing it
	Opening additional sterile instruments whenever the procedure becomes difficult
	Arranging instruments alphabetically on the Mayo stand
	Preparing the next likely instrument while continuing to monitor the progress of the procedure

During surgery, smoke continues to obscure the operative field despite active smoke evacuation. Which observation most strongly suggests that the evacuation system itself should be assessed?

	Smoke accumulates even though the energy device is functioning normally
	The laparoscope has been white balanced correctly
	The monitor is positioned directly in front of the surgeon
	The laparoscope is a 30° telescope

After a laparoscopic procedure, an insulated instrument is found to have a small crack in its insulation. What is the most appropriate management?

	Send it for routine cleaning and return it to service if no other damage is visible
	Cover the defect before reprocessing to prevent further damage
	Remove the instrument from service, label the defect, and report it according to institutional policy
	Continue using the instrument until replacement equipment becomes available

A team experiences repeated equipment interruptions during several laparoscopic procedures. Which approach is most likely to reduce similar problems in future cases?

	Increase the amount of backup equipment opened before every procedure
	Replace all laparoscopic equipment on a fixed schedule regardless of condition
	Limit equipment checks to emergency procedures where time is limited
	Document equipment problems accurately, communicate them promptly, and ensure defective equipment is inspected before being returned to service

During equipment setup, the circulating nurse notices that the camera image appears sharp but horizontal structures look tilted on the monitor. Which adjustment is most appropriate?

	Increase the monitor brightness
	Rotate the camera head until the image horizon is level
	Reposition the laparoscopic tower
	Replace the laparoscope with a 0° scope

A laparoscopic procedure has been completed. Which action best supports effective point-of-use care before instruments leave the operating room?

	Allow instruments to air dry before transport
	Immediately immerse optical equipment completely in cleaning solution
	Transport instruments directly to sterile processing without any preparation
	Remove visible soil, keep instruments moist, and flush lumened instruments according to local protocol

While preparing the laparoscopic tower, the perioperative nurse discovers that the fibreoptic light cable has visible burn marks near the connector. What is the safest action?

	Remove the cable from service and replace it before the procedure begins
	Continue using the cable if adequate illumination is still present
	Reduce the light source intensity to prevent further damage
	Wrap the damaged section to prevent further wear during surgery

During a laparoscopic procedure, suction performance gradually decreases while irrigation continues to function normally. What is the most appropriate initial assessment?

	Replace the camera head
	Inspect the suction tubing and handpiece for obstruction or loose connections
	Increase insufflation pressure
	Replace the electrosurgical unit

Why should heavier laparoscopic instruments be positioned beneath lighter and more delicate instruments during transport?

	To simplify instrument counting after reprocessing
	To reduce transport time between departments
	To protect delicate instruments and optical equipment from crushing or impact damage
	To improve the effectiveness of sterilization

During troubleshooting, the surgeon reports that instrument movement feels increasingly restricted even though the camera image remains clear. Which system should be assessed first?

	The camera control unit
	The monitor position
	The fibreoptic light cable
	The insufflation system to determine whether pneumoperitoneum is being maintained

Why is it important to inspect laparoscopic instruments for missing components such as screws, tips, or insulation defects before reprocessing?

	To identify equipment requiring repair before it is returned to clinical service
	To determine whether additional sterilization cycles are required
	To decide which instruments should be discarded after every procedure
	To reduce the amount of documentation required during reprocessing

During preparation for surgery, the laparoscopic system appears fully assembled, but the perioperative nurse performs a final cord sweep before the patient enters the operating room. What is the primary purpose of this review?

	To verify that all disposable supplies have been documented
	To confirm that white balancing has been performed
	To ensure cables and tubing are secure, safely routed, and free from hazards before surgery begins
	To identify which instruments are most likely to be used first

A laparoscopic procedure requires several integrated systems to function simultaneously. Which statement best explains why troubleshooting should be approached systematically rather than by replacing equipment immediately?

	Most equipment malfunctions are caused by manufacturing defects
	Replacing equipment automatically restores the operative workflow
	Troubleshooting is primarily intended to reduce equipment costs
	Problems affecting one system may produce symptoms that appear to originate from another system, requiring logical assessment before corrective action

Before reusable laparoscopic equipment is transferred to the sterile processing department, why should tray lists and any special reprocessing instructions accompany the equipment?

	To ensure the equipment is correctly identified, cleaned, inspected, and reprocessed according to its specific requirements
	To allow alternative cleaning methods to be selected if preferred
	To reduce the need for communication between the operating room and sterile processing department
	To determine which equipment will be used during the next procedure

Return to main

Page data
Part of	Laparoscopic Surgery - ECSACONM
Keywords	surgery, health
SDG	SDG03 Good health and well-being
Authors	Ian-laurel
License	CC-BY-SA-4.0
Organizations	ECSACONM, SELF
Language	English (en)
Related	0 subpages, 1 pages link here
Views	0 page views (analytics)
Created	July 30, 2026 by Ian-laurel-1
Last edit	July 30, 2026 by StandardWikitext bot
Cite as	Ian-laurel-1 (2026). "SELF/Perioperative Nursing/Laparoscopy Setup/Laparoscopy Setup Cumulative Assessment". Appropedia. Retrieved July 30, 2026.
API queries	basic, semantic, html, files, more