Jump to content

Quiz 1: Vital Signs Monitoring - ECSACONM

From Appropedia

Use the quiz below to check your understanding of the material.

Instructions

Work through each question carefully to choose the best answer, and submit the quiz to view your results. After completing the quiz, read through the answer explanations to review the reasoning behind both correct and incorrect options.

Return to main

1

Before using a manual blood pressure cuff, what simple check best confirms the device’s readiness for accurate measurement?

Measure a colleague’s pressure and compare to a digital monitor
Observe the mercury column for smooth movement during deflation
Inflate the cuff to 200 mmHg and confirm it holds pressure without leakage
Listen for Korotkoff sounds on yourself to confirm audibility

2

During surgery, pulse oximetry readings become erratic due to electrocautery interference. Which adjustment aligns with best practice?

Disable oximetry alarms to avoid distraction during interference
Switch to an ear or forehead probe to improve signal reliability
Rely on ECG and BP trends alone for oxygenation assessment
Increase cuff cycling frequency to offset oxygenation uncertainty

3

A postoperative patient’s blood pressure has fallen from 140/80 mmHg to 100/60 mmHg. Why is this clinically concerning?

The drop represents a significant fall from baseline, suggesting possible instability
The reading indicates mild hypertension, typical during recovery
Systolic pressure below 110 mmHg always signifies shock
Any value below 120/80 mmHg is abnormal after surgery

4

Which observation would most warrant escalation during routine monitoring in recovery?

Temperature 36.2 °C with normal pulse oximetry waveform
Heart rate stable at 88 bpm, oxygen saturation 97%
Respiratory rate rising to 26 breaths/min with falling oxygen saturation
Blood pressure returning toward baseline after rewarming

5

Which statement best reflects correct cleaning and maintenance of vital-signs equipment?

Thermometer probes only require cleaning when disposable covers are unavailable
Equipment cords and sensors should be coiled and stored loosely to prevent insulation wear
Pulse oximeter sensors can be cleaned at the end of each shift unless visibly contaminated
BP cuffs should be wiped with approved disinfectant after each patient and laundered on schedule


Return to main

Page data
Part of Vital Signs Monitoring - ECSACONM#Documentation
Keywords surgery, health
SDG SDG03 Good health and well-being
Authors
License CC-BY-SA-4.0
Organizations ECSACONM, SELF
Language English (en)
Related 0 subpages, 2 pages link here
Views 6 page views (analytics)
Created October 20, 2025 by KatKor
Last edit October 20, 2025 by StandardWikitext bot
Cookies help us deliver our services. By using our services, you agree to our use of cookies.