|
Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source 3-D printing and recycling. |
|
 |
This user is a member of the Michigan Tech Open Sustainability Technology (MOST) Research Group. |
 |
This user is a member with an interest and knowledge of Photovoltaics. |
 |
This user is a member with an interest and knowledge of Open Source Hardware. |
 |
This user is a member with an interest and knowledge of 3-D printing. |
or any other research interest boxes
 |
| Short description of yourself
Links to online presence if you have one. |
Bio[edit | edit source]
Your biography here.
Research Interests[edit | edit source]
With internal links that you maintain. This is your literature reviews and project pages.
Examples:
Top 5 Journals in My Sub-field[edit | edit source]
Journal Title, impact factor(year), link, reference style, open access cost
Example:
- PLOS One, 3.5(2013), http://www.plosone.org/ , numbered, $1350
Publications[edit | edit source]
Example:
- Feeley, S. R., Wijnen, B., & Pearce, J. M. (2014). Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament. Journal of Sustainable Development, 7(5), 1-12. DOI: 10.5539/jsd.v7n5p1 open access
Skills[edit | edit source]
- With internal links to our methods pages - if you have a skill without an updated methods page - start/update it.
Example: Tensile test protocol: MOST
Image Gallery[edit | edit source]
Gallery of your great successes...
Fig 1:MTU PhD Research Fellow (Jephias Gwamuri) with DNV.KEMA Energy & Sustainability Principal Engineer, Solar (Tim Townsend) & Pete after system installation at KRC.
Fig 2:DNV.GL & MTU-KRC System:System: Effect of snow vs panel angle and ground elevation project
Fig 3:DNV.GL & MTU-KRC System
Fig 4:DNV.GL & MTU-KRC System
.jpg)
.jpg)
.jpg)
.jpg)
