3D-Printed Miniaturized Microbial Fuel Cells for Sustainable Energy Harvesting
Project Overview
[edit | edit source]This project brings together three areas of research focused on improving the design and performance of miniaturized microbial fuel cells (MFCs) for sustainable energy generation. The first explores how the aquatic environment, hydrodynamic conditions, and reactor depth influence the performance of 3D-printed MFCs. The second focuses on developing stacked MFC configurations with auxiliary electrodes to address voltage reversal and improve power generation. The third explores the use of banana leaf-based bioelectrodes and other sustainable materials as greener alternatives for microbial electricity generation.
The devices were designed using SolidWorks and fabricated through FDM 3D printing using polylactic acid (PLA). Experimental studies involved assembling the reactors, integrating electrodes, introducing microbial cultures, and evaluating their electrochemical performance under different operating conditions.
Together, these studies demonstrate how 3D printing, bio-electrochemical engineering, and sustainable electrode materials can be combined to develop compact and adaptable microbial energy-harvesting devices.
Device Design and Architecture
[edit | edit source]The MFC devices were designed using SolidWorks to develop compact reactor structures for energy generation. Different designs were fabricated using FDM 3D printing with PLA filament. The work included stacked MFC configurations and different electrode arrangements to study their effect on electricity generation. Auxiliary electrodes were also added to address voltage reversal in stacked devices. Different reactor designs and electrode positions were tested to understand how these changes affected the overall performance of the MFCs.
Fabrication and Assembly
[edit | edit source]
The reactor components were fabricated using FDM 3D printing with PLA filament. After printing, the individual parts were assembled to form the MFC chambers, followed by electrode placement and electrical connections. Different electrode arrangements were tested depending on the reactor design. The assembled devices were then prepared for microbial inoculation and electrochemical testing. This approach allowed the reactor designs to be modified and tested without having to fabricate an entirely new device each time.

The assembled devices were then prepared for microbial inoculation and electrochemical testing. This approach allowed the reactor designs to be modified and tested without having to fabricate an entirely new device each time.
Electrochemical Characterization and Performance
[edit | edit source]
The electrochemical performance of the fabricated microbial fuel cells was evaluated using cyclic voltammetry (CV), polarization studies, power density measurements and repeatability tests. These analyses were used to examine electrode activity, electricity generation and the operational stability of the devices.

In the 3D-printed miniaturized MFCs, two device configurations were evaluated using embedded electrodes and additional assistance electrodes. The devices achieved peak power densities of 8.72 µW/cm² and 1.05 µW/cm², respectively. The assistance electrode configuration also demonstrated potential for reducing voltage reversal in stacked MFC systems.

For underwater MFCs, performance was examined at different immersion depths under stagnant and aerated conditions in lake water and artificial seawater. The results showed that power density generally decreased with increasing depth. Aeration improved power retention in lake water from 62.88% to 68.06%, while repeatability and stability tests demonstrated consistent device operation.
Further studies explored sustainable electrode materials, including banana-derived bioelectrodes and food-based conductive pastes. The banana-based bioelectrode MFC achieved a maximum power density of 5.02 µW/cm², with 93% reproducibility across independently fabricated devices.
Together, these studies demonstrate the use of electrochemical characterization to compare device architectures, assess electrode materials and evaluate the reliability of miniaturized MFCs for sustainable energy harvesting.
Application and Future Scope
[edit | edit source]The developed miniaturized microbial fuel cells have potential applications in low-power energy harvesting, environmental monitoring and bioelectrochemical systems. Their compact, 3D-printed structures allow different reactor configurations to be fabricated and tested, while the use of sustainable electrode materials offers an alternative approach to conventional electrode development.
The research on underwater MFCs provides a basis for exploring bioenergy generation in aquatic environments, including applications where water movement, aeration and operating depth influence device performance. Stacked MFC configurations may also support the development of compact energy sources for low-power electronic systems.
Future work can explore the integration of these devices with wireless sensors, energy storage units and low-power Internet of Things (IoT) platforms. Further improvements in electrode materials, reactor design, long-term stability and power management will be important for practical deployment. The food-based electrodes and bioelectrochemical materials developed in this work also offer opportunities for further research into biodegradable and ingestible sensing platforms for biomedical and environmental monitoring.
Reference and Publications
[edit | edit source]- Banana Leaf-Based Bioelectrodes for Microbial Fuel Cells: Towards Green Bioenergy
- Influence of hydrodynamics and depth on the performance of 3D-printed microbial fuel cells
- Multiple 3D-Printed Miniaturized Microbial Fuel Cells With Embedded Electrodes Optimized by Sustainable and Synergistic Perovskites Materials
| Authors | Yuvraj Maphrio Mao |
|---|---|
| License | CC-BY-SA-4.0 |
| Cite as | Yuvraj Maphrio Mao (2026). "3D-Printed Miniaturized Microbial Fuel Cells for Sustainable Energy Harvesting". Appropedia. Retrieved November 17, 2026. |