Kathy Nativi (talk | contribs) No edit summary |
|||
(20 intermediate revisions by 3 users not shown) | |||
Line 2: | Line 2: | ||
<!-- These comments are offered as an aid as you get started. Remove as you wish. --> | <!-- These comments are offered as an aid as you get started. Remove as you wish. --> | ||
<!-- next line is the code for inserting an image; delete if you don't have an image yet --> | <!-- next line is the code for inserting an image; delete if you don't have an image yet --> | ||
{{Template:ENGR215inprogress| May 13, 2019 }} | {{Template:ENGR215inprogress| May 13, 2019 }} | ||
<!--infobox--> | |||
{{OpenKhowHowManifest | |||
|manifest-date-created= | |||
|manifest-date-updated=2020-06-04 | |||
|manifest-author-name=Kathy Nativi | |||
|manifest-author-affiliation=Appropedia | |||
|manifest-autho-email=info@appropedia.org | |||
|title=Zane Middle School P.E. equipment cart | |||
|description=The purpose of this project was to work with Zane Middle School representative and P.E. Instructor, Garett Montana, to address the problems of storing and transporting P.E. equipment. | |||
|intended-use= | |||
|keywords= | |||
|project-link= | |||
|contact-affiliation=Humboldt State University | |||
|contact-appropedia-user=User:Cw243 | |||
|image=TeamEnterpriseCaRt.jpg | |||
|development-stage= | |||
|made=No | |||
|made-independently=Yes | |||
|derivative-of= | |||
|manufacturing-files= | |||
|manifest-language=eng | |||
|date-published= | |||
|main-materials= | |||
|estimated-cost-amount= 74.95 | |||
|estimated-cost-currencyUSD | |||
|sustainable-development-goal=Sustainable Development Goal 4 | |||
|documentation-language=eng | |||
}} | |||
<!--end infobox--> | |||
==Abstract== | |||
[[File:TeamEnterpriseTeam&Cart.jpg|thumb|center|Team Enterprise with finished P.E. equipment cart.]] | |||
[[File: TeamEnterpriseCaRt.jpg|thumb|Fig 1: Final Cart Design]] [[File:TeamEnterpriseFrontofCart.png|thumb|Fig 2: Front view of cart]] | |||
The purpose of this project was to work with Zane Middle School representative and P.E. Instructor, Garett Montana, to address the problems of storing and transporting P.E. equipment. The need for a P.E. equipment cart for the school was addressed and different designs were analyzed for possible solutions. The most important design of the cart must allow for storage of the P.E. jump-ropes that prevents them from tangling and kinking. | The purpose of this project was to work with Zane Middle School representative and P.E. Instructor, Garett Montana, to address the problems of storing and transporting P.E. equipment. The need for a P.E. equipment cart for the school was addressed and different designs were analyzed for possible solutions. The most important design of the cart must allow for storage of the P.E. jump-ropes that prevents them from tangling and kinking. | ||
== Background == | == Background == | ||
Zane Middle School, located in Eureka, CA is one of the largest middle schools from just north of San Francisco all the way up to Oregon. P.E. is a mandatory class for all students | Zane Middle School, located in Eureka, CA is one of the largest middle schools from just north of San Francisco all the way up to Oregon. P.E. is a mandatory class for all students who attend the middle school; there are 6 P.E. classes a day (each 1 hour long) 5 days a week. At the start of every P.E. class they begin by doing jump-roping, and they continue to do so until the last person has finished, after which they then begin their daily activity. Zane Middle School reached out to our class in the spring of 2019 because their P.E. class is in need of a cart which needs to accomplish a few things; easily transport and store P.E. equipment while also preventing tangling/ kinking of the jump-ropes. | ||
== Problem Statement and Criteria == | == Problem Statement and Criteria == | ||
Zane Middle School's P.E. classes have to manually move all of the P.E. equipment separately every class and have to manually return each separately as well. When returning jump-ropes after use students roll each up and they are all thrown into a bucket for storage. This system for storing jump-ropes results in tangling and kinking of the jump-ropes, leading to longer time to unravel them and having to used kinked jump-ropes which makes them harder to use. To solve this Problem Team Enterprise has designed and created a cart that would allow for all equipment to be stored and moved all together on one cart; in doing so it also secures and properly stores jump-ropes preventing them from tangling and kinking. | Zane Middle School's P.E. classes have to manually move all of the P.E. equipment separately every class and have to manually return each separately as well. When returning jump-ropes after use students roll each up and they are all thrown into a bucket for storage. This system for storing jump-ropes results in tangling and kinking of the jump-ropes, leading to longer time to unravel them and having to used kinked jump-ropes which makes them harder to use. To solve this Problem Team Enterprise has designed and created a cart that would allow for all equipment to be stored and moved all together on one cart; in doing so it also secures and properly stores jump-ropes preventing them from tangling and kinking. | ||
= | {| class="wikitable sortable" | ||
! Weight !! Criteria !! Description !! | |||
|- | |||
| 10 || Safety|| Must not cause harm to any persons during use | |||
|- | |||
| 10 || Jump rope capability|| Must prevent kinking/tangling of jump ropes | |||
|- | |||
| 7 || Accessibility|| Materials must be easily accessible by students and teachers and allow for immediate use a storage of equipment | |||
|- | |||
| 6 || Durability || Must be stable and able to withstand daily usage over a long period of time | |||
|- | |||
| 5 || Mobility || Cart must be easily maneuverable by teachers and students | |||
|- | |||
| 5 || Material Weight || Must be able to hold at least 50 jump ropes, a few large buckets, and a large speaker | |||
|- | |||
| 5 || Maintenance || Quick and easy to maintain, allow for simple return of equipment | |||
|- | |||
| 4 || Aesthetics || Must embody Zane Middle School spirit | |||
|} | |||
[[File: | == Description of final project == | ||
The P.E. Equipment cart is approximately four feet tall and features lower shelving for bucket storage as well as room for other supplies as needs. A top shelf is also included allowing for additional storage and simple access to supplies. The cart’s special design is an original Team Enterprise design; around the top sides of the cart are boards on both sides which securely hold the jump ropes. These boards are made from wood and were individual cut out in a tooth like design. It stores jump ropes in the crevasses in between each “tooth”and are held in place by inverted hooks at the bottom side edges of the cart. One simply folds the jump rope in half and hooks the rope below, then holding both handles notch them in the slot above corresponding to the right hook. This design enables the jump ropes to be held and stored without tangling and preventing kinking, allowing for the jump ropes to be in better shape when using and last longer. The cart is simple yet meets all the qualifications from the client. | |||
[[File:TeamEnterpriseCaRt2.png|thumb|left|Fig 4: Google Sketch-up side view of the final design]] | |||
[[File: TeamEnterpriseCaRt.jpg|thumb|center|Fig 1: Final Cart Design]] | |||
===Prototyping=== | ===Prototyping=== | ||
While prototyping for this cart design we wanted to make them be as close as possible to our decided final design. We made one small scale prototype to physically see our design and see how practical it actually is. Following the small scale prototype we built a full size prototype in order to make sure our design was as functional as we planned and to find what measurements would work best for the car.t | |||
[[File: TeamEnterprise_building_pt1.jpg|thumb|left|Fig 5: Prototype 1, side view of a small scaled cart]] | |||
[[File: TeamEnterprise_building_pt2.png|thumb|center|Fig 6: Prototype 2, life size version of cardboard model]] | |||
{{-}} | |||
=== Costs === | === Costs === | ||
While constructing the P.E. equipment cart, Team Enterprise received donations from Harbor Freight, The Mill Yard, and Sherwin Williams Paint. These donations gave our team necessary material needed to construct the cart. The other purchases as noted below required full payment for each. | |||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
! Quantity !! Material !! Source !! Cost ($) !! Total ($) | ! Quantity !! Material !! Source !! Cost ($) !! Total ($) | ||
|- | |- | ||
| 1 || Wood || The Mill Yard | | 1 || 10ft x 1ft x 2” piece of Pine Wood || The Mill Yard | ||
|align="right"| 40.00 | |align="right"| 40.00 | ||
|align="right"| Donated | |align="right"| Donated | ||
|- | |- | ||
| 1 || Cart|| Harbor Freight | | 1 || Polypropylene Cart|| Harbor Freight | ||
|align="right"| | |align="right"| 130.00 | ||
|align="right"| | |align="right"| Donated | ||
|- | |- | ||
| 2 || Screws/bolts sets|| Ace Hardware | | 2 || Screws/bolts sets|| Ace Hardware | ||
Line 48: | Line 99: | ||
|- | |- | ||
| 1 || Hooks Set|| Ace Hardware | | 1 || Hooks Set|| Ace Hardware | ||
|align="right"| | |align="right"| 14.95 | ||
|align="right"| | |align="right"| 14.95 | ||
|- | |- | ||
| | | 6 || Cans of Spray Paint || Ace Hardware | ||
|align="right"| 40.00 | |align="right"| 40.00 | ||
|align="right"| | |align="right"| 40.00 | ||
|-class="sortbottom" | |-class="sortbottom" | ||
|colspan="4" align="right" | '''Total Cost''' | |colspan="4" align="right" | '''Total Cost''' | ||
|align="right"| '''$ | |align="right"| '''$74.95''' | ||
|} | |} | ||
==Testing Results== | ==Testing Results== | ||
Once we completely finished constructing our cart we starting putting jump ropes on to test our system and to see how well our notch boards work for holding the jump ropes. We were very pleased to see that our design was a success and able to properly and sufficiently serve its purpose as a P.E. Equipment cart. | |||
[[File:TeamEnterpriseRoping.gif]] | |||
==How to build== | ==How to build== | ||
{{How to | |||
|title= Title | |||
|pics=no | |||
|||1| Get (1) piece of wood approximately 10ft x 1ft x 2” | |||
{{Gallery | |||
| File:TeamEnterprise sawing .png | Cut wood board in half | |||
| File:TeamEnterpriseNotchBoard.png | Measure and cut even notches into top edge of each | |||
| | | |||
}} | |||
|||2| Putting it together | |||
{{Gallery | |||
| File:TeamEnterprise cartBuilding.png | Assemble Cart | |||
| File:TeamEnterprise painting cart.png | Spray paint cart and let dry | |||
| File:TeamEnterprisePaintedBoards.png | Paint wood boards | |||
| | | |||
}} | |||
|||3| Finishing up | |||
{{Gallery | |||
| File:TeamEnterpriseScrewinIn.png |Screw boards into top sides of cart and hooks on bottom | |||
| File:TeamEnterpriseCaRt.jpg | Put jump ropes on and ready to roll | |||
}} | |||
}} | |||
== Maintenance == | == Maintenance == | ||
This P.E. equipment cart requires very minimal maintenance and very rarely. | This P.E. equipment cart requires very minimal maintenance and very rarely. | ||
{| class="wikitable sortable" | |||
! Maintenance !! Time !! Cost !! Frequency !! Procedure !! | |||
|- | |||
| Touch up paint where flake-age or fading occurred || 10-30 minutes || $6.99 / bottle || 0-1 per year || Use Kraylon spray paint and apply where needed | |||
|- | |||
| Grease casters if not functioning properly || 5 minutes || $3.00 / bottle|| Once every 2-3 years || Spray WD-40 on and around caster wheel | |||
|- | |||
| Total || 15-30 minutes / year || $9.99 / year || Once per year after first sign of deterioration (est. 1 year) | |||
|} | |||
=== Schedule === | === Schedule === | ||
Line 108: | Line 195: | ||
|title=How to Maintain | |title=How to Maintain | ||
|File: | |File:TeamEnterprise WD40.jpg||1 |Grease wheels | ||
}} | |File:TeamEnterprise painting cart.png||2 |Repaint Cart| }} | ||
== Troubleshooting == | == Troubleshooting == | ||
Line 135: | Line 220: | ||
| Paint Peeling or Fading | | Paint Peeling or Fading | ||
| Repaint with appropriate | | Repaint with appropriate colored Kraylon spray paint | ||
|} | |} | ||
Line 141: | Line 226: | ||
==Discussion and next steps== | ==Discussion and next steps== | ||
In the final construction of the P.E. Equipment cart we initially painted the cart with Sherwin Williams all surface enamel paint; however, when dried this paint peeled very easily. We realized that we could not use this paint because it would not last, instead we used Kraylon Fusion spray paint meant for plastic surfaces which worked excellently. | |||
Line 149: | Line 235: | ||
==References== | ==References== | ||
{{Reflist}} | {{Reflist}} | ||
Line 160: | Line 246: | ||
== Contact details == | == Contact details == | ||
Team Enterprise can be contacted through HSU's Engineering 215 class | |||
<!-- Don't change the next line unless you intend to change the categorization --> | <!-- Don't change the next line unless you intend to change the categorization --> | ||
<!-- Do add additional, appropriate categories. See http://www.appropedia.org/Appropedia:CategoryTree for ideas. --> | <!-- Do add additional, appropriate categories. See http://www.appropedia.org/Appropedia:CategoryTree for ideas. --> | ||
[[Category:Projects]] | [[Category:Projects]] |
Revision as of 16:51, 16 June 2020
Abstract
The purpose of this project was to work with Zane Middle School representative and P.E. Instructor, Garett Montana, to address the problems of storing and transporting P.E. equipment. The need for a P.E. equipment cart for the school was addressed and different designs were analyzed for possible solutions. The most important design of the cart must allow for storage of the P.E. jump-ropes that prevents them from tangling and kinking.
Background
Zane Middle School, located in Eureka, CA is one of the largest middle schools from just north of San Francisco all the way up to Oregon. P.E. is a mandatory class for all students who attend the middle school; there are 6 P.E. classes a day (each 1 hour long) 5 days a week. At the start of every P.E. class they begin by doing jump-roping, and they continue to do so until the last person has finished, after which they then begin their daily activity. Zane Middle School reached out to our class in the spring of 2019 because their P.E. class is in need of a cart which needs to accomplish a few things; easily transport and store P.E. equipment while also preventing tangling/ kinking of the jump-ropes.
Problem Statement and Criteria
Zane Middle School's P.E. classes have to manually move all of the P.E. equipment separately every class and have to manually return each separately as well. When returning jump-ropes after use students roll each up and they are all thrown into a bucket for storage. This system for storing jump-ropes results in tangling and kinking of the jump-ropes, leading to longer time to unravel them and having to used kinked jump-ropes which makes them harder to use. To solve this Problem Team Enterprise has designed and created a cart that would allow for all equipment to be stored and moved all together on one cart; in doing so it also secures and properly stores jump-ropes preventing them from tangling and kinking.
Weight | Criteria | Description | |
---|---|---|---|
10 | Safety | Must not cause harm to any persons during use | |
10 | Jump rope capability | Must prevent kinking/tangling of jump ropes | |
7 | Accessibility | Materials must be easily accessible by students and teachers and allow for immediate use a storage of equipment | |
6 | Durability | Must be stable and able to withstand daily usage over a long period of time | |
5 | Mobility | Cart must be easily maneuverable by teachers and students | |
5 | Material Weight | Must be able to hold at least 50 jump ropes, a few large buckets, and a large speaker | |
5 | Maintenance | Quick and easy to maintain, allow for simple return of equipment | |
4 | Aesthetics | Must embody Zane Middle School spirit |
Description of final project
The P.E. Equipment cart is approximately four feet tall and features lower shelving for bucket storage as well as room for other supplies as needs. A top shelf is also included allowing for additional storage and simple access to supplies. The cart’s special design is an original Team Enterprise design; around the top sides of the cart are boards on both sides which securely hold the jump ropes. These boards are made from wood and were individual cut out in a tooth like design. It stores jump ropes in the crevasses in between each “tooth”and are held in place by inverted hooks at the bottom side edges of the cart. One simply folds the jump rope in half and hooks the rope below, then holding both handles notch them in the slot above corresponding to the right hook. This design enables the jump ropes to be held and stored without tangling and preventing kinking, allowing for the jump ropes to be in better shape when using and last longer. The cart is simple yet meets all the qualifications from the client.
Prototyping
While prototyping for this cart design we wanted to make them be as close as possible to our decided final design. We made one small scale prototype to physically see our design and see how practical it actually is. Following the small scale prototype we built a full size prototype in order to make sure our design was as functional as we planned and to find what measurements would work best for the car.t
Costs
While constructing the P.E. equipment cart, Team Enterprise received donations from Harbor Freight, The Mill Yard, and Sherwin Williams Paint. These donations gave our team necessary material needed to construct the cart. The other purchases as noted below required full payment for each.
Quantity | Material | Source | Cost ($) | Total ($) |
---|---|---|---|---|
1 | 10ft x 1ft x 2” piece of Pine Wood | The Mill Yard | 40.00 | Donated |
1 | Polypropylene Cart | Harbor Freight | 130.00 | Donated |
2 | Screws/bolts sets | Ace Hardware | 20.00 | 20.00 |
1 | Hooks Set | Ace Hardware | 14.95 | 14.95 |
6 | Cans of Spray Paint | Ace Hardware | 40.00 | 40.00 |
Total Cost | $74.95 |
Testing Results
Once we completely finished constructing our cart we starting putting jump ropes on to test our system and to see how well our notch boards work for holding the jump ropes. We were very pleased to see that our design was a success and able to properly and sufficiently serve its purpose as a P.E. Equipment cart.
How to build
Maintenance
This P.E. equipment cart requires very minimal maintenance and very rarely.
Maintenance | Time | Cost | Frequency | Procedure | |
---|---|---|---|---|---|
Touch up paint where flake-age or fading occurred | 10-30 minutes | $6.99 / bottle | 0-1 per year | Use Kraylon spray paint and apply where needed | |
Grease casters if not functioning properly | 5 minutes | $3.00 / bottle | Once every 2-3 years | Spray WD-40 on and around caster wheel | |
Total | 15-30 minutes / year | $9.99 / year | Once per year after first sign of deterioration (est. 1 year) |
Schedule
This is when to maintain what.
- Daily
- No daily tasks
- Weekly
- No weekly tasks
- Monthly
- No monthly tasks
- Yearly
- Grease casters if cart no longer moves as smoothly (done most easily with WD-40)
- Every 2-3 years
- Repaint Cart
Instructions
This is how to maintain. The step by step how to template {{How to}} is most likely best for this part.
Troubleshooting
This is only how to troubleshoot basic operation. For complex issues, contact Team Enterprise at Humboldt State University.
Problem | Suggestion |
---|---|
Wheels not moving smoothly | Grease caster wheels (done most easily with WD-40) |
Paint Peeling or Fading | Repaint with appropriate colored Kraylon spray paint |
Discussion and next steps
In the final construction of the P.E. Equipment cart we initially painted the cart with Sherwin Williams all surface enamel paint; however, when dried this paint peeled very easily. We realized that we could not use this paint because it would not last, instead we used Kraylon Fusion spray paint meant for plastic surfaces which worked excellently.
Suggestions for future changes
Caster wheels can be replaced by simply unscrewing with a phillips-head screwdriver or drill.
References
Contact details
Team Enterprise can be contacted through HSU's Engineering 215 class