Thermal conductivity of filaments for 3D printing lit review: Revision history

26 February 2016

• curprev 05:2505:25, 26 February 2016‎ JLaureto talk contribs‎ 37,259 bytes +1,758‎ →‎Literature undo
• curprev 03:1203:12, 26 February 2016‎ JLaureto talk contribs‎ 35,501 bytes −37‎ →‎3D Printing Technology Spread undo
• curprev 03:1203:12, 26 February 2016‎ JLaureto talk contribs‎ 35,538 bytes −17‎ →‎Literature undo
• curprev 03:1103:11, 26 February 2016‎ JLaureto talk contribs‎ 35,555 bytes +2,655‎ →‎Conductive undo
• curprev 02:0402:04, 26 February 2016‎ JLaureto talk contribs‎ 32,900 bytes 0‎ /* {http://pic.sagepub.com/content/217/1/31.short Analysis of rapid manufacturing—using layer manufacturing processes for productionHopkinson, Neil, and P. Dicknes. "Analysis of rapid manufacturing—using layer manufacturing processes for production... undo
• curprev 02:0202:02, 26 February 2016‎ JLaureto talk contribs‎ 32,900 bytes +1,435‎ →‎3D Printing Technology Spread undo
• curprev 01:5801:58, 26 February 2016‎ JLaureto talk contribs‎ 31,465 bytes +760‎ →‎Translator disclaimer Intelligent rapid prototyping with fused deposition modelling Masood, Syed H. "Intelligent rapid prototyping with fused deposition modelling." Rapid Prototyping Journal 2.1 (1996): 24-33. undo
• curprev 01:5801:58, 26 February 2016‎ JLaureto talk contribs‎ 30,705 bytes 0‎ →‎3D Printing Technology Spread undo
• curprev 01:5701:57, 26 February 2016‎ JLaureto talk contribs‎ 30,705 bytes +344‎ →‎3D Printing Technology Spread undo
• curprev 01:5201:52, 26 February 2016‎ JLaureto talk contribs‎ 30,361 bytes +1,476‎ →‎3D Printing Technology Spread undo
• curprev 01:4801:48, 26 February 2016‎ JLaureto talk contribs‎ 28,885 bytes +852‎ →‎3D Printing Technology Spread undo
• curprev 01:3601:36, 26 February 2016‎ JLaureto talk contribs‎ 28,033 bytes +1,340‎ →‎3D Printing Technology Spread undo
• curprev 01:3101:31, 26 February 2016‎ JLaureto talk contribs‎ 26,693 bytes +1,023‎ →‎3D Printing Technology Spread undo
• curprev 01:2101:21, 26 February 2016‎ JLaureto talk contribs‎ 25,670 bytes +1‎ →‎Understanding and Improving the Quality of Inter-Layer Interfaces in FDM 3-D PrintingDuranty, Edward, et al. "Understanding and Improving the Quality of Inter-Layer Interfaces in FDM 3-D Printing." Bulletin of the American Physical Society (2016). undo
• curprev 01:2101:21, 26 February 2016‎ JLaureto talk contribs‎ 25,669 bytes +4‎ →‎3D Printing Technology Spread undo
• curprev 01:2001:20, 26 February 2016‎ JLaureto talk contribs‎ 25,665 bytes +2,217‎ →‎Literature undo
• curprev 00:3700:37, 26 February 2016‎ JLaureto talk contribs‎ 23,448 bytes +1,457‎ →‎Literature undo

24 February 2016

• curprev 05:2805:28, 24 February 2016‎ JLaureto talk contribs‎ 21,991 bytes 0‎ /* {http://link.springer.com/article/10.1023/A:1024096401779 Predicting, Measuring, and Tailoring the Transverse Thermal Conductivity of Composites from Polymer Matrix and Metal FillerDanes, F., B. Garnier, and T. Dupuis. "Predicting, measuring, and ta... undo
• curprev 05:2705:27, 24 February 2016‎ JLaureto talk contribs‎ 21,991 bytes +1,780‎ →‎Literature undo

23 February 2016

• curprev 18:2118:21, 23 February 2016‎ JLaureto talk contribs‎ 20,211 bytes +249‎ →‎Conceptual framework for the thermal process modelling of fused depositionM. Atif Yardimci, Selçuk Güçeri, (1996) "Conceptual framework for the thermal process modelling of fused deposition", Rapid Prototyping Journal, Vol. 2 Iss: 2, pp.26 - 31 undo

22 February 2016

• curprev 04:3204:32, 22 February 2016‎ JLaureto talk contribs‎ 19,962 bytes +333‎ →‎FDM 3D Printing Technology in Manufacturing Composite ElementsArchives of Metallurgy and Materials. Volume 58, Issue 4, Pages 1415–1418, ISSN (Online) 2300-1909, DOI: 10.2478/amm-2013-0186, December 2013 undo
• curprev 04:2504:25, 22 February 2016‎ JLaureto talk contribs‎ 19,629 bytes +264‎ /* Thermal characteristics of a new metal/polymer material for FDM rapid prototyping processS.H. Masood, W.Q. Song, (2005) "Thermal characteristics of a new metal/polymer material for FDM rapid prototyping process", Assembly Automation, Vol. 25 Iss: 4,... undo
• curprev 04:2104:21, 22 February 2016‎ JLaureto talk contribs‎ 19,365 bytes +225‎ /* Effect of Particle Shape on Thermal Conductivity of Copper Reinforced Polymer CompositesTekce, H. Serkan, Dilek Kumlutas, and Ismail H. Tavman. "Effect of particle shape on thermal conductivity of copper reinforced polymer composites." Journal of Re... undo
• curprev 04:1604:16, 22 February 2016‎ JLaureto talk contribs‎ 19,140 bytes +236‎ /* Electrical and thermal conductivity of polymers filled with metal powders Ye.P. Mamunya, V.V. Davydenko, P. Pissis, E.V. Lebedev, Electrical and thermal conductivity of polymers filled with metal powders, European Polymer Journal, Volume 38, Issue 9... undo

11 February 2016

• curprev 18:5218:52, 11 February 2016‎ JLaureto talk contribs‎ 18,904 bytes +1,837‎ →‎Literature undo
• curprev 18:4018:40, 11 February 2016‎ JLaureto talk contribs‎ 17,067 bytes +1,427‎ →‎Literature undo
• curprev 18:3718:37, 11 February 2016‎ JLaureto talk contribs‎ 15,640 bytes 0‎ /* [http://www.sciencedirect.com/science/article/pii/S0261306904000378 Development of new metal/polymer materials for rapid tooling using Fused deposition modellingMasood, S. H., and W. Q. Song. "Development of new metal/polymer materials for rapid too... undo
• curprev 18:3618:36, 11 February 2016‎ JLaureto talk contribs‎ 15,640 bytes +1,261‎ →‎Literature undo
• curprev 18:3218:32, 11 February 2016‎ JLaureto talk contribs‎ 14,379 bytes +2,031‎ →‎Literature undo
• curprev 15:0015:00, 11 February 2016‎ JLaureto talk contribs‎ 12,348 bytes 0‎ →‎Literature undo
• curprev 14:5914:59, 11 February 2016‎ JLaureto talk contribs‎ 12,348 bytes +1,295‎ →‎Literature undo
• curprev 14:5514:55, 11 February 2016‎ JLaureto talk contribs‎ 11,053 bytes +857‎ →‎Literature undo
• curprev 14:5014:50, 11 February 2016‎ JLaureto talk contribs‎ 10,196 bytes +1,521‎ →‎Literature undo
• curprev 14:4614:46, 11 February 2016‎ JLaureto talk contribs‎ 8,675 bytes +916‎ →‎Literature undo
• curprev 14:4314:43, 11 February 2016‎ JLaureto talk contribs‎ 7,759 bytes −1‎ /* {http://www.emeraldinsight.com/doi/abs/10.1108/01445150510626451 Thermal characteristics of a new metal/polymer material for FDM rapid prototyping processS.H. Masood, W.Q. Song, (2005) "Thermal characteristics of a new metal/polymer material for FDM... undo
• curprev 14:4214:42, 11 February 2016‎ JLaureto talk contribs‎ 7,760 bytes +1,337‎ →‎Literature undo
• curprev 14:3514:35, 11 February 2016‎ JLaureto talk contribs‎ 6,423 bytes 0‎ /* {http://jrp.sagepub.com/content/26/1/113.short Effect of Particle Shape on Thermal Conductivity of Copper Reinforced Polymer CompositesTekce, H. Serkan, Dilek Kumlutas, and Ismail H. Tavman. "Effect of particle shape on thermal conductivity of coppe... undo
• curprev 14:3514:35, 11 February 2016‎ JLaureto talk contribs‎ 6,423 bytes +1,390‎ →‎Literature undo
• curprev 14:3314:33, 11 February 2016‎ JLaureto talk contribs‎ 5,033 bytes +8‎ →‎Literature undo
• curprev 14:3214:32, 11 February 2016‎ JLaureto talk contribs‎ 5,025 bytes +1‎ →‎Literature undo
• curprev 14:3114:31, 11 February 2016‎ JLaureto talk contribs‎ 5,024 bytes +1‎ →‎Literature undo
• curprev 14:3014:30, 11 February 2016‎ JLaureto talk contribs‎ 5,023 bytes +1,114‎ →‎Literature undo
• curprev 14:2314:23, 11 February 2016‎ JLaureto talk contribs‎ 3,909 bytes +1,886‎ →‎Literature undo
• curprev 14:1914:19, 11 February 2016‎ JLaureto talk contribs‎ 2,023 bytes +18‎ /* Enhanced thermal conductivity of polymer composites filled with hybrid fillerGeon-Woong Lee, Min Park, Junkyung Kim, Jae Ik Lee, Ho Gyu Yoon, Enhanced thermal conductivity of polymer composites filled with hybrid filler, Composites Part A: Applied S... undo
• curprev 14:1814:18, 11 February 2016‎ JLaureto talk contribs‎ 2,005 bytes +1,813‎ →‎Literature undo
• curprev 14:0914:09, 11 February 2016‎ JLaureto talk contribs‎ 192 bytes −14‎ →‎References undo
• curprev 14:0914:09, 11 February 2016‎ JLaureto talk contribs‎ 206 bytes +19‎ No edit summary undo
• curprev 14:0114:01, 11 February 2016‎ JLaureto talk contribs‎ 187 bytes +15‎ No edit summary undo
• curprev 14:0014:00, 11 February 2016‎ JLaureto talk contribs‎ 172 bytes +47‎ →‎Background undo
• curprev 13:4813:48, 11 February 2016‎ JLaureto talk contribs‎ 125 bytes +125‎ Created page with "{{MOST}} {{Lit}} == Background == * [[]] * [[]] * [[]] == External links == * [] {{stub}} [[Category:]] [[Category:]]"