We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.
Difference between revisions of "Smart shade"
Jump to navigation Jump to search
Galasiu, Anca D; Morad R Atif, Robert A MacDonald (2004-01). "Impact of window blinds on daylight-linked dimming and automatic on/off lighting controls". Solar Energy 76 (5): 523-544. doi:10.1016/j.solener.2003.12.007. ISSN 0038092X. Retrieved 2012-02-10.
Boubekri, Mohamed; Robert B. Hull, Lester L. Boyer (1991-07-01). "Impact of Window Size and Sunlight Penetration on Office Workers' Mood and Satisfaction". Environment and Behavior 23 (4): 474 -493. doi:10.1177/0013916591234004. Retrieved 2012-02-10.
Lee, E.S.; D.L. DiBartolomeo, S.E. Selkowitz (1998-12). "Thermal and daylighting performance of an automated venetian blind and lighting system in a full-scale private office". Energy and Buildings 29 (1): 47-63. doi:10.1016/S0378-7788(98)00035-8. ISSN 0378-7788.
Roisin, B.; M. Bodart, A. Deneyer, P. D. Herdt (2008). "Lighting energy savings in offices using different control systems and their real consumption". Energy and Buildings 40 (4): 514-523. doi:10.1016/j.enbuild.2007.04.006. ISSN 0378-7788.
Stephenson, D.G. (1964). "Equations for solar heat gain through windows". Solar Energy 9 (2): 81-86. Retrieved 2012-02-10.
"Arduino motor/stepper/servo control - How to use". Retrieved 2012-02-10.
"Arduino playground - InterfacingWithHardware". Retrieved 2012-02-10.
"Arduino playground - PIDLibrary". Retrieved 2012-02-10.
|Line 103:||Line 103:|
Revision as of 00:03, 11 February 2014
- Cited 18 times
- Photo controlled lighting systems (variable lighting based off of PV sensing)
- Possibly useful for future work section
- lighting control systems found to be responsible for 50-60% reduction in energy consumption
- Compares dimming systems and on/off systems
- investigates numerous blinds configurations
- Cited 46 times
- Possibly useful for general discussion (Effects on users) and important information for controls, QC, reception, and design
- Study investigates the impact of window size as well as assorted amounts of sunlight penetration's effect on occupant (user) emotional response and satisfaction
- Interesting algebraic approach to determine mood
- Trends for mood based on area of floor covered in sun
- Cited 72 times
- Study utilized automated Venetian blinds synchronized with a dimmable electric lighting system.
- Report is very well written and may provide good introduction information
- Contains room blueprints, list of monitored data...
- Paper could be extremely useful for a basis for writing report
- Cited 20 times
- Simulations based off of DAYSIM
- Estimates energy savings due to smart dimming of lights
- Savings found to be between 45-61%
- Possibly useful for future work and background information
- Cited 38 times
- Calculates insolation empirically (20 stations in Scarborough, Ontario)
- Similar Latitude (Scarborough: 43.78º, Houghton: 47.12º)
- Variables: time, date, latitude, building orientation, type of glass, and shading
- Equations for Direct Normal Insolation @ ground level (DNI)...
- Isolation Charts
- Reference/requirements for small motor control using arduino microcontroller boards
- May be useful resource for blind/shade actuation
- Resource for interfacing arduino microcontrollers with many types of hardware
- Interfacing with temperature sensors potentially useful
- Useful for PID control on arduino
- contains libraries for PID functions
- Joshua M, Pearce (2002-09). "Photovoltaics — a path to sustainable futures". Futures 34 (7): 663-674. doi:10.1016/S0016-3287(02)00008-3. ISSN 0016-3287.
Abstract: As both population and energy use per capita increase, modern society is approaching physical limits to its continued fossil fuel consumption. The immediate limits are set by the planet’s ability to adapt to a changing atmospheric chemical composition, not the availability of resources. In order for a future society to be sustainable while operating at or above our current standard of living a shift away from carbon based energy sources must occur. An overview of the current state of active solar (photovoltaic, PV) energy technology is provided here to outline a partial solution for the environmental problems caused by accelerating global energy expenditure. The technical, social, and economic benefits and limitations of PV technologies to provide electricity in both off-grid and on-grid applications is critically analyzed in the context of this shift in energy sources. It is shown that PV electrical production is a technologically feasible, economically viable, environmentally benign, sustainable, and socially equitable solution to society’s future energy requirements.
- Cited 42 times
- Useful for background/introduction information
- Kimball, J.W.; Kuhn, B.T.; Balog, R.S. (2009-04). "A System Design Approach for Unattended Solar Energy Harvesting Supply". Power Electronics, IEEE Transactions on 24 (4): 952-962. doi:10.1109/TPEL.2008.2009056. ISSN 0885-8993.
Abstract: Remote devices, such as sensors and communications devices, require continuously available power. In many applications, conventional approaches are too expensive, too large, or unreliable. For short-term needs, primary batteries may be used. However, they do not scale up well for long-term installations. Instead, energy harvesting methods must be used. Here, a system design approach is introduced that results in a highly reliable, highly available energy harvesting device for remote applications. First, a simulation method that uses climate data and target availability produces Pareto curves for energy storage and generation. This step determines the energy storage requirement in watt-hours and the energy generation requirement in watts. Cost, size, reliability, and longevity requirements are considered to choose particular storage and generation technologies, and then to specify particular components. The overall energy processing system is designed for modularity, fault tolerance, and energy flow control capability. Maximum power point tracking is used to optimize solar panel performance. The result is a highly reliable, highly available power source. Several prototypes have been constructed and tested. Experimental results are shown for one device that uses multicrystalline silicon solar cells and lithium-iron-phosphate batteries to achieve 100% availability. Future designers can use the same approach to design systems for a wide range of power requirements and installation locations.
- Nasiri, A.; Zabalawi, S.A.; Mandic, G. (2009-11). "Indoor Power Harvesting Using Photovoltaic Cells for Low-Power Applications". Industrial Electronics, IEEE Transactions on 56 (11): 4502-4509. doi:10.1109/TIE.2009.2020703. ISSN 0278-0046.
Abstract: Utilization of low-power indoor devices such as remote sensors, supervisory and alarm systems, distributed controls, and data transfer system is on steady rise. Due to remote and distributed nature of these systems, it is attractive to avoid using electrical wiring to supply power to them. Primary batteries have been used for this application for many years, but they require regular maintenance at usually hard to access places. This paper provides a complete analysis of a photovoltaic (PV) harvesting system for indoor low-power applications. The characteristics of a target load, PV cell, and power conditioning circuit are discussed. Different choices of energy storage are also explained. Implementation and test results of the system are presented, which highlights the practical issues and limitations of the system.