Salvaging from broken machinery can be a really good way to get useful parts for free, and can also help to minimise waste. This page will list useful parts that can be found in common consumer appliances, as well as projects in which they can be used.
It is probably best to salvage as needed, for the majority of parts. If the parts you need aren't listed here, come back and add them, when you figure out where to find them.
Electronics
Tools needed
A mimimal tool set for salvaging electronic components is:
- A soldering iron
- Solder wick (copper braid), or a solder sucker (harder to use than a wick, but less wasteful).
- Pointy-nosed pliers, or tweezers
- Screwdrivers for taking apart cases
Basic Electronics
Basic electronic components, such as resistors, capacitors, diodes, transistors, sensors etc. are easy to find in most consumer electronics. There are two major types: through-hole, and surface mount devices (SMD). SMDs are more difficult to handle without specialised equipment, although it can be done[1].
If your PCB boards don't have many components that will be damaged by heat, you can mass-remove components with a heat gun[2].
Good sources for through-hole components include:
- Any very old electronics (earlier than 2000)- SMDs are only fairly recently widespread.
- Monitors. Older CRT monitors, especially, but some older LCD monitors also had through-hole circuits. Often have large capacitors, transformers, and inductors.
Links with descriptions of where to find components:
- Salvage Parts and Sources - Open Circuits.
- Where to Salvage Electronic Parts - Keith's Electronics Blog.
- Scavenging and Salvaging Old Circuit Boards - Electronics Forum.
- How To Get FREE Electronic parts! by Plasmana on Instructables.
- [Fun and Profit with Electronic Salvage!] - The Electronic Peasant.
- How-To: Where to find parts for your projects - hackaday.com
Stepper Motors
Stepper motors are useful beasts, that can be used for driving things like RepRaps, or DIY CNC machines. Can be expensive to buy new. Stepper motors usually need driver chips too.
Sources:
- Old dot-matrix/inkjet printers. These can include useful driver chips.
- Old hard drives (PC form factor, <20G, in the head control).
- Floppy Drives, some CD/DVD drives.
Speakers
Can be salvaged very easily from anything that makes sound. Stereo TVs often have good speakers
Mechanical components
Bearings
Belts
Gears
Optics
Fresnel lenses
These can be ripped out of rear-projection TVs by hand, and used more or less as-is, with a frame, as a solar collector for Concentrated solar power, or solar cooking.
References
- ↑ Salvaging Surface Mount Components - Instructables
- ↑ How to salvage parts from PCBs with a heat gun - PCB Heaven.