(→Design) |
(→Design) |
||
Line 36: | Line 36: | ||
My original plan was to cut the end off of the water heater and the cut it down its length opposite of a flat spot it had. | My original plan was to cut the end off of the water heater and the cut it down its length opposite of a flat spot it had. | ||
File:1st solar concentrator CAD model | File:1st solar concentrator CAD model.JPG | ||
====Prototype==== | ====Prototype==== | ||
Line 42: | Line 42: | ||
File:Prototype CAD model.JPG| This the CAD model of my prototype | File:Prototype CAD model.JPG| This the CAD model of my prototype | ||
File:Testing prototype|Even more sample caption text. | File:Testing prototype.JPG|Even more sample caption text. | ||
====Final Design==== | ====Final Design==== | ||
Line 48: | Line 48: | ||
Describe your design here. | Describe your design here. | ||
File:2nd solar concentrator CAD model | File:2nd solar concentrator CAD model.JPG | ||
File:Solar concentrator.JPG|Sample caption text. | File:Solar concentrator.JPG|Sample caption text. |
Revision as of 19:14, 20 January 2017
An old water heater was donated to my high school's pre-engineering class. After watching an episode of "The Cosmos," in which a farm of parabolic solar concentrators were used to heat water in order to power a steam engine that irrigated water, I was inspired to recycle the old water heater and turn it into a concentrated solar water heater.
Project goal
Recycle an old household water heater and an old school chair and turn it into a solar water heater
Project steps:
- Research solar heater designs
- Model full scale design
- Model and build a 3-D printed small scale prototype
- Test effectiveness of design based on prototype
- Build full scale solar concentrator
Research
Before starting to design my concentrated solar water heater I researched what some other people hade made.
There were two main designs I found:
- Parabolic concentrator
- Commercially available parabolic concentrated solar food cooker for camping
- DIY parabolic concentrated solar water heater[1]
- Industrial parabolic concentrator farms to power steam engines (like the one I saw on "the Cosmos")
- Flat plate collector
- DIY flat plate solar collector [1]
- Commercially available flat plate solar collector for home use
Design
My original plan was to cut the end off of the water heater and the cut it down its length opposite of a flat spot it had.
File:1st solar concentrator CAD model.JPG
Prototype
File:Prototype CAD model.JPG| This the CAD model of my prototype
File:Testing prototype.JPG|Even more sample caption text.
Final Design
Describe your design here.
File:2nd solar concentrator CAD model.JPG
File:Solar concentrator.JPG|Sample caption text.
</gallery>
Next level heading
You may need deeper level headings. Just keep adding equal signs to get that.
Costs
Item | Cost |
---|---|
plastic filament | free |
3" pvc pipe | free |
water heater | free |
chair legs | free |
smaller glass tube | $7.20 |
larger glass tube | $8.30 |
reflective mylar film | $11.00 |
Results and Discussion
Your discussion.
Next steps
The next steps.