Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Piston Water Pump"

From Appropedia
Jump to: navigation, search
(Publisher)
(Publisher)
Line 5: Line 5:
  
 
=== Publisher ===
 
=== Publisher ===
Brace Research Institute
+
[http://www.mcgill.ca/brace/ Brace Research Institute]
 
MacDonald College
 
MacDonald College
McGill University
+
[http://www.mcgill.ca/ McGill University]
 
Ste. Anne de Bellevue 800
 
Ste. Anne de Bellevue 800
 
Quebec Canada H9X 1CO
 
Quebec Canada H9X 1CO

Revision as of 21:06, 1 February 2010

Publication Number T-114

Abstract

This document gives schematic drawings of the assembly and operation of a wind powered water pump. The drawings are accompanied by a list of parts and materials used in the pumps manufacturing.

Publisher

Brace Research Institute MacDonald College McGill University Ste. Anne de Bellevue 800 Quebec Canada H9X 1CO

Installation

Page 1 - Installation (not to scale)

Assembly

Page 2 - Assembly (not to scale)
Page 3 - Assembly

Piston and Piston Rod

Page 4 - Piston Rod (not to scale)
Page 5 - Piston (not to scale)

Washers and Piston Head

Page 6 - Schematic of Rubber Washer and Steel plate (not to scale)
Page 7 - Schematic of Black Steel Plates

Operation

Page 8 - Pump Operational Steps

Parts and Materials

Page 9 - List of Parts and Materials

List of Parts and Materials

  • 36 - Nut Bored at 8mm
  • 34 - Round HD-Screw 4mm
  • 32 - Nut 8mm
  • 30 - Iron Rod 8mm
  • 28 - Steel Plate 4mm
  • 26 - Steel Plate 4mm
  • 24 - Rubber Washer 5mm
  • 22 - Rubber Washer 5mm
  • 20 - Black Steel Plate 4mm
  • 18 - Black Steel Plate 4mm
  • 16 - Coupling 90mm/100mm
  • 14 - Galv. Pipe 33mm/42mm
  • 12 - Galv. Pipe 80mm/90mm