(→Wiring from battery to Meter: updateeeeeeeeeeeeeeeed) |
(→Face) |
||
Line 102: | Line 102: | ||
{{How to | {{How to | ||
|title= | |title= Making and Mounting the Infinity Mirrors | ||
|size= 180 | |size= 180 | ||
|Image:Cutting glass.jpg | (Photo by Bruce) | |Image:Cutting glass.jpg | (Photo by Bruce) | ||
|1 | Cut | |1| Cut plexiglass if its not in circle with diameter of 8 inches | ||
|Image:INFmirrorLID.jpg| attaching the plexiglass to the mirror lid | |||
|2| Use silconized caulking to attach the plexiglass to the steel ventilation lid. | |||
|Image:OuterINFmirrorRing.jpg| The outer ring of the infinity mirror | |||
|3| Cut and bend tabs on a steel ventilation duct and screw onto the housings face. | |||
|Image:Hole for wiring.jpg| drilling a hole for the infinity mirror's wiring | |||
|4| Drill a 3/4 inch hole in the aluminum face for the inner rings LED's wiring to fit through. | |||
|footer= | |footer= | ||
}} | }} |
Revision as of 23:29, 5 December 2011
Step by step instructions
Housing
Material | Measurement |
---|---|
Sheet of aluminum | 7 ft X 3 ft |
squared metal beam | 1ft length, 1/2 inch diameter and width |
Woodfast roofing screw | 1 inch |
Image:Cut pieces.jpg
Meter's housing
Base (optional)
Material | Measurement |
---|---|
2 aluminum plates | 2 ft X 33 ft |
3 round rubber stoppers | radius of 1.5 inches |
2 rubber casters | radius of 3 inches |
sliding gate wheel bracket | 2 ft by 4 ft |
nuts and bolts | less than 3 inches |
Image:110411193799a.jpg
Meter's Base
Face
Material | Measurement |
---|---|
2 circular mirrors | radius of 3.5 inch |
2 steel ventilation adapters | 8 inch to 6 inch adapter |
Plexiglass (Lexan* Polycarbonate sheet) | 6 inch circles |
steel ventilation duct (color black) | radius of 4 inches |
Blue LED lights | amount of 40 lights |
Sheet metal screws | 1/2 inch long |
Thermostat wire | 24 gauge wire (red and white) |
Image:Cutting glass.jpg
Making and Mounting the Infinity Mirrors
Wiring from battery to Meter
Material | Measurement |
---|---|
Aluminum electrical conduit | 1/2 inch width, 25 ft long |
Thermostat wire | 24 gauge wire (red and white) |
BVM1 Circuit Board | N/A |
60/40 Rosin core solder | One Roll |
Tupperware | 3x5 Inch |
Scrap 1/4 Inch Plywood | Two 3x3 Inch pieces |
Image:Empty circuit board.jpg
Circuit Board