Main page
New page
Upload file
Help
Community portal
Recent changes
Talk
Contributions
Create account
Enable dark mode
Enable read mode
Log in
View history
What links here
Related changes
Page information
Editing
Fully adjustable, fully printable spool holder
(section)
From Appropedia
Warning!
You are not logged in.
Log in
or
create an account
to have your edits attributed to your username rather than your IP, along with other benefits.
Anti-spam check. Do
not
fill this in!
== Instructions == These parts can be found at [http://www.thingiverse.com/thing:575388 thingiverse] ==== Parts Needed ==== In order to create this holder you will need to print off the following parts The fill of the parts can be fairly low (10%-15%) * 1-Base * 2-Movable parts * 4-pins * 4 bushings ==== tools needed ==== * most delta 3_d printer or similar model * PLA filiment ==== Part Assembly ==== To Begin # place the pins into all of the bushings like figure 1 shows # next place the pin bushing assembly into the moving part as figure 2 shows, depending on your filament the pin may need to be moved into a different spot. # If desired, screw the base to desired location using the tabs on the side of the base. This is not necessary. # Place the movable part assembly into the base <gallery> File:Pin bushing.JPG|step 1 File:Pinassem.JPG|step 2 File:Fullassembl.JPG|step 4 File:Spool holder.JPG|completed spool holder </gallery> {{Page data}}
Summary:
Warning!
All contributions to Appropedia are released under the CC-BY-SA-4.0 license unless otherwise noted (see
Appropedia:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here! You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted material without permission!
Cancel
Editing help
(opens in new window)
This page is a member of 2 hidden categories:
Category:Pages with commas in the title
Category:Pages with no lead text
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
OK
Discussion