Image
|
Description
|
How to build
|
|
Adjust Bench
- The exercise with Dumbbell, Barbell, or a Smith Machine.
- The 2 x 2, and 3 mm thickness is used with a 180-degree heat Powder Coating.
- Height adjustable 45 to 90 flat leather of PVC artificial leather.
- Weight 16 kg footprint by about 0.6 x 1.20 x 1.00 m.
|
Help us creating:
- Schematics(CAD) file.
- CAD Animation
- Video
- Build instructions
|
|
Cable Cross
- The exercise has several parts by weight of each side, 20 sheets per 10lbs.
- Structure and a 3 x 3 inch Color Powder Coating 180-degree heat.
- The approximate weight of 500 kg footprint by about 3 .. 50 x 3.00 x 2.20 m.
- Cable Cross Over, Lat Pulldown, Low Pulley, Shin Up,.
|
|
|
Dip device and a shoulder, arm and back, abs
- Use of the arms, shoulders, back and chest and abdominal muscle thickness and strength.
- 3 x 3-inch thick steel 3 mm thick with a Powder Coating Oven temperature 180 degrees.
- PVC imitation leather upholstery type.
- The approximate weight of 60 kg footprint to approximately 1.50 x 1.00 x 1.60 m.
|
|
|
Flat Bench
- The exercise with Dumbbell, Barbell, or a Smith Machine.
- The small 3 x 1.5, 2 x 2 and 3 mm thick with a Powder Coating Oven temperature 180 degrees.
- Seat cushions are covered with PVC film, synthetic leather.
- Weight 15 kg footprint to approximately 0.50 x 1.20 x 0.40 m.
|
|
|
Utility Bench seat multi-purpose
- The exercise with Dumbbell, Barbell, or a Smith Machine.
- The 2 x 2 and a thickness of 3 mm. A Color Powder Coating 180-degree heat.
- Seat cushions are covered with PVC film, synthetic leather.
- Weight 20 kg footprint by about 0.5 x 0.70 x 1.00 m.
|
|
Olympic Bar
- Management with the Flat Bench Press, Power Rack, Bench Row,.
- Solid shaft diameter 28 mm-handed grip for this sleek nickel-plated steel.
- 48 mm diameter bar is removable.
- Weight 18 kg
|
|
|
Olympic Plate weight standard 2-inch hole
- There are 5 sizes of 20kg. 15kg. 10kg. 5kg. And 2.5kg.
- Heat oven to 180 degrees Color Powder Coating.
- The band around the handle grip.
- Weight of each piece in a set of standards with a total weight of 105kg.
|
|
|
Weight Rack
- Weight 4, 6, 9, 11, 13.16, 19 and 21 kg class with a double length 160 cm.
- Cast iron with a Powder Coating Oven temperature 180 degrees.
- Cover plate 8 mm thick polished center line 110 mm
- The sleek 30-mm steel rod-shaped non-slip grip design.
|
|
|
Dip & Shrug shoulders, arms and back
- The leaflet shoulders, arms, shoulders, and a bold and strong. The weight is the weight of gravity.
- Structural steel and 3 x 2 x 2 inches, 1.5 inches with a 3 mm Color Powder Coating 180-degree heat.
- Article I, grade A game of ball bearings to withstand the pressure is much higher.
- PVC imitation leather upholstery type. The low level of the lock pin.
- The approximate weight of 80 kg footprint by approximately 1.20 x 1.50 x 1.00 m.
|
|
|
Seated Calv machine
- And the calf muscle to the North and healthy weight in a sitting position, using the weights.
- Structures 2 and 3 x 2 x 1.5 inch Color Powder Coating Oven temperature 180 degrees.
- Grade A type of crankshaft bearings to reduce friction.
- PVC imitation leather upholstery type.
- The approximate weight of 30 kg footprint to approximately 0.60 x 1.20 x 1.00 m.
|
|
|
Standing Calv & Squat
- And the calf muscle to the North and strength in standing by the weight of the load.
- Structures 2 and 3 x 2 x 1.5 inch Color Powder Coating Oven temperature 180 degrees.
- Grade A type of crankshaft bearings to reduce friction.
- PVC imitation leather upholstery type.
- The approximate weight of 50 kg footprint to approximately 1.00 x 1.50 x 1.80 m.
|
|
|
Preacher
- The use of the arm muscles to expand and strengthen the EZ bar or Dumbbell.
- S to maintain a 3 x 1.5 x 2-inch thick steel 3 mm thick with a Powder Coating Oven temperature 180 degrees.
- Tilt the seat next to the booth bearing an ergonomic sitting position in a class.
- The approximate weight of 30 kg the installation is approximately 1.00 x 1.00 x 1.00 m.
|
|
|
Hyper Extension
- Use of muscles or abdominal muscles.
- Steel 3 mm thick, 2 x 2 with Color Powder Coating Oven temperature 180 degrees.
- The approximate weight of 30 kg the installation is approximately 1.00 x 1.20 x 1.10 m.
|
|
|
Flat & Incline Bench
- The chest muscle exercise. The class has two levels. Is tilted and flat.
- The small 3 x 2 x 2 inches, 1.5 inches and a thickness of 3 mm with a 180-degree heat Powder Coating.
- The bar has three levels, and lightweight, so I kind of PVC artificial leather. Adjust the seat.
- The approximate weight of 60 kg footprint to approximately 1.50 x 1.60 x 1.30 m.
|
|
|
Kneeling Leg Curls
- The bottom and thigh muscle strength using weight as a counterbalance
- The 2 x 2 inches, with a Powder Coating Oven temperature 180 degrees.
- Crank hard plastic polythene grade A. The Technology
- PVC imitation leather upholstery type. To the administration. Left leg and right leg.
- The approximate weight of 40 kg the installation is approximately 1.50 x 1.50 x 1.50 m.
|
|
|
Cable Cross Over Machine
- The arms, shoulders, back and chest muscles with weights on each side of each sheet 20 10lbs / side.
- The small 3 x 2 x 2 inches and 1.5 inches 2. x 2-inch Color Powder Coating Oven temperature 180 degrees.
- A number of 16-grade PVC reel with the handle of a long rope and rope, three-sided shape.
- The approximate weight of 300 g kg footprint by approximately 1.20 x 2.80 x 2.20 m.
|
|
|
Smith Machine
- The chest, shoulders, back or legs and muscular strength.
- The small 3 x 3 and a thickness of 3 mm with a 180-degree heat Powder Coating.
- Safety system with hook and bar with a long stick with a pivot 9.
- PVC coated wires hide the clutter weighted bar.
- Boots bearing slides. Running on a circular shaft. Quenching of 25 mm in size
- The approximate weight of 90 kg footprint to approximately 1.50 x 1.20 x 2.20 m.
|
|
|
Cable Cross
- The exercise has several parts by weight of each side, 20 sheets per 10lbs.
- Structure and a 3 x 3 inch Color Powder Coating 180-degree heat.
- The approximate weight of 920 kg footprint by about 3 .. 50 x 3.00 x 2.20 m.
- Cable Cross Over, Lat Pulldown, Low Pulley, Cable.
- Pressdown, Shin Up, Bicep Curl, Dip.
|
|
|
Leg Extension
- The front of the thigh muscle volume and strength. The weight is the weight of gravity.
- The small 1.5 and 3 x 2 x 2 inches, with a Powder Coating Oven temperature 180 degrees.
- Grade A boots crank bearings reduce friction. With steel plates. Reduction in transmission wires.
- PVC imitation leather upholstery type. Select the position where the depth of the kick.
- The approximate weight of 60 kg footprint to approximately 1.20 x 1.00 x 1.00 m.
|
|
|
Leg Curl
- Use the back and thigh muscle volume and strength. The weight is the weight of gravity.
- The small 1.5 and 3 x 2 x 2 inches, with a Powder Coating Oven temperature 180 degrees.
- Grade A boots crank bearings reduce friction. With steel plates. Reduction in transmission wires.
- PVC imitation leather upholstery type. Select the position where the depth of the kick.
- The approximate weight of 60 kg footprint to approximately 1.50 x 1.20 x 1.20 m.
|
|
|
Incline Chest Press
- The chest muscle exercise. The thickness and width. The weight is the weight of gravity.
- The small 1.5-inch and 2 3. x 2-inch Color Powder Coating Oven temperature 180 degrees.
- Two arms move independently. The crankshaft bearings are grade A, with a special
- PVC imitation leather upholstery type. Adjustable high and low.
- Estimated weight of 60 kg Nu footprint to approximately 1.50 x 1.50 x 1.70 m.
|
|
|
Hight Row
- Use of back muscles. The thickness and width. The weight is the weight of gravity.
- The small 1.5-inch and 2 3. x 2-inch Color Powder Coating Oven temperature 180 degrees.
- Two arms move independently. The crankshaft bearings are grade A, with a special
- PVC imitation leather upholstery type. Adjustable high and low.
- Estimated weight of 60 kg author Footprint of approximately 120 x 150 x 180 cm.
|
|
|
Low Row
- Use of back muscles. The thickness and width. The weight is the weight of gravity.
- The small 1.5-inch and 2 3. x 2-inch Color Powder Coating Oven temperature 180 degrees.
- Two arms move independently. The crankshaft bearings are grade A, with a special
- PVC imitation leather upholstery type. Adjustable high and low.
- Estimated weight of 60 kg author Footprint is approximately 1.50 x 1.50 x 1.60 m.
|
|
|
Lat Pulldown
- Use of back muscles. The thickness and width. The weight is the weight of gravity.
- The small 1.5-inch and 2 3. x 2-inch Color Powder Coating Oven temperature 180 degrees.
- Crank arm with a ball bearing type, grade A, 12 to give a special
- PVC imitation leather upholstery type. Adjustable high and low.
- Estimated weight of 70 kg Nu footprint to approximately 1.20 x 1.20 x 2.00 m.
|
|
|
Preacher Machine
- Use of muscles in the arm by the weight of the load.
- 2 x 2 inch thick steel 3 mm thick with a Powder Coating Oven temperature 180 degrees.
- This suspension was plated with shiny pins around the anchor rope and crank bearing plate test with a grade of A.
- PVC imitation leather upholstery type. Tilt level.
- The approximate weight of 60 kg footprint to approximately 1.00 x 1.10 x 1.10 m.
|
|
|
Decline Chest Press
- The chest muscle exercise. The thickness and width. The weight is the weight of gravity.
- The small 1.5-inch and 2 3. x 2-inch Color Powder Coating Oven temperature 180 degrees.
- Two arms move independently. The crankshaft bearings are grade A, with a special
- PVC imitation leather upholstery type. Adjustable high and low.
- Estimated weight of 60 kg Nu footprint to approximately 1.50 x 1.50 x 1.00 m.
|
|
|
Leg Curls
- The muscles of the arm by the weight of the plate in the top 20.
- The 3 x 3 inch thick and 3 mm with a Powder Coating Oven temperature 180 degrees.
- PVC coated wire rope traction force to carry around a plate. Plastic pulley. The ultra-high durability.
- Grade A boots bearing crankshaft to the high input.
- PVC imitation leather upholstery type. I have seen the move.
- The approximate weight of 180 kg footprint to approximately 1.00 x 1.40 x 1.50 m.
|
|
|
Training Chest Press
- The muscles of the chest. By weight of the plate in the top 20.
- The small 3 x 3 x 2 inches and 2 inches thick, 3 mm with a Powder Coating Oven temperature 180 degrees.
- PVC coated wire rope hoist with plastic traction force. The ultra-high durability.
- Grade A boots bearing crankshaft to the high input.
- PVC imitation leather upholstery type. I have seen the move.
- The approximate weight of 180 kg footprint to approximately 1.00 x 1.40 x 1.50 m.
|
|
|
Lat Pulldown
- Use of back muscles. By weight of the plate in the top 20.
- The small 3 x 3 x 2 inches and 2 inches thick, 3 mm with a Powder Coating Oven temperature 180 degrees.
- PVC coated wire rope hoist with plastic traction force. The ultra-high durability.
- The 1-inch steel bar, rod bent-handed catch.
- PVC imitation leather upholstery type. I have seen the move.
- The approximate weight of 180 kg footprint to approximately 1.00 x 1.40 x 1.50 m.
|
|
|
Leg Curls on the back of the legs
- The leaflet used by the back legs of the 20 weight classes.
- The 3 x 3 inch thick and 3 mm with a Powder Coating Oven temperature 180 degrees.
- PVC coated wire rope traction force to carry around a plate. Plastic pulley. The ultra-high durability.
- Grade A boots bearing crankshaft to the high input.
- PVC imitation leather upholstery type. I have seen the move.
- The approximate weight of 180 kg footprint to approximately 1.00 x 1.40 x 1.50 m.
|
|
|
Leg Extension
- Use of the front thigh muscles. By weight of the plate in the top 20.
- The small 3 x 3 x 2 inches and 2 inches thick, 3 mm with a Powder Coating Oven temperature 180 degrees.
- PVC coated wire rope traction force to carry around a plate. Plastic pulley. The ultra-high durability.
- Grade A boots bearing crankshaft to the high input.
- PVC imitation leather upholstery type. I have seen the move.
- The approximate weight of 180 kg footprint to approximately 1.00 x 1.40 x 1.50 m.
|
|
|
Fly Chest (Revers)
- The muscles of the chest. The back and shoulders. By weight, of 20 floors.
- The small 3 x 3 x 2 inches and 2 inches thick, 3 mm with a Powder Coating Oven temperature 180 degrees.
- PVC coated wire rope jerk injury around the pulley plates are plastic. The ultra-high durability.
- Grade A boots bearing crankshaft to the high input.
- PVC imitation leather upholstery type. I have seen the move.
- The approximate weight of 180 kg footprint to approximately 1.00 x 1.40 x 1.50 m.
|
|