Editing FOTD living green roof

Using the criteria and their respective weights we picked a design that looks professional and allows plants to survive in the summer. Once built, it will have a low weight, and can be built without threatening the structural integrity of the building. Plastic Bend-A-Board is used for the retaining wall, with the components of the green roof layered behind. Hydrostop waterproofing paint is applied once more to roof to ensure the roof will not leak. The base layer of the roof is a protection fabric to stop roots from growing into the roof, and is followed by a synthetic drainage layer. The synthetic layer is a light material, and with its many pockets to hold water, will assist in keeping the roof green during the dry months, while removing excess water during the rainy months. On top of the drainage layer will be a separation filter fabric. Four inches of native soil will be placed on top of the filter sheet to be used as the growing medium. An erosion control blanket placed on top of the planting medium will stop the soil from getting blown off or washed away during winter storms. It is made of a biodegradable material, and is only expected to last until the plants are big enough to hold onto the soil themselves. A micro sprinkler system will be installed on top, to provide water during the summer. These layers of the roof will create a habitat on top in which native plants can thrive, and an effective drainage system on the bottom.