Bpeticolas (talk | contribs) |
|||
Line 62: | Line 62: | ||
Image: Square_Ring_Picture.JPG | [https://www.thingiverse.com/thing:3895976 Customizable Square Ring] | Image: Square_Ring_Picture.JPG | [https://www.thingiverse.com/thing:3895976 Customizable Square Ring] | ||
Image:CustomLegoHeadKW.png|[https://www.thingiverse.com/thing:3891957/ Customizable Lego Head!] | Image:CustomLegoHeadKW.png|[https://www.thingiverse.com/thing:3891957/ Customizable Lego Head!] | ||
Image: Lego Maker.png | [https://www.thingiverse.com/thing:3907292 Customizable Lego Brick] | |||
</gallery> | </gallery> |
Revision as of 01:04, 10 October 2019
This project is to design a customizable OpenSCAD script.
- Using OpenSCAD either design an original customizable object, or adapt an existing scad file you find online to work with the open source customizer.
- Make it printable (you do not need to print it) for your RepRap
- Post your SCAD and STL of your design on Thingiverse (if a derivative make sure you give attribution with an OS license)
- Add a rendering of your project along with the link to Thinkiverse in the gallery below following the example.
Optional
- If your project turned out really nice you can print it for show and tell
- Bonus if your design has high utility and you set up a webpage with the OS customizer along with instructions on how to do it(see: Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD)
Gallery
Add your image and link the gallery below in a single line after the last one in the list