Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Chemical resistance of 3D printable polymers: literature review"

From Appropedia
Jump to: navigation, search
m (Sources)
m (Sources)
Line 81: Line 81:
  
 
*Philip J. Kitson , Mark D. Symes , Vincenza Dragone and Leroy Cronin: [http://pubs.rsc.org/en/content/articlehtml/2013/sc/c3sc51253c Combining 3D printing and liquid handling to produce user-friendly reactionware for chemical synthesis and purification], Chem. Sci., 2013, 4, 3099-3103. DOI: 10.1039/C3SC51253C
 
*Philip J. Kitson , Mark D. Symes , Vincenza Dragone and Leroy Cronin: [http://pubs.rsc.org/en/content/articlehtml/2013/sc/c3sc51253c Combining 3D printing and liquid handling to produce user-friendly reactionware for chemical synthesis and purification], Chem. Sci., 2013, 4, 3099-3103. DOI: 10.1039/C3SC51253C
 +
**Reactionware for a multi-step reaction was made, step control by rotating the device and letting gravity do the work -> need for pumps eliminated
 +
**Approaches from earlier articles combined: vessel was printed from PP, liquid-handling robot was used to functionalize the vessel
 +
**PP: melting point approx. 160°C, maximum working temperature 150°C
 +
**PP impermeable to hexane and diethly ether vapors, pressure build-up might need to be mitigated
 +
 +
 
*Bethany C. Gross, Jayda L. Erkal, Sarah Y. Lockwood, Chengpeng Chen, and Dana M. Spence: [http://pubs.acs.org/doi/abs/10.1021/ac403397r Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences], Anal. Chem., 2014, 86 (7), pp 3240–3253, DOI: 10.1021/ac403397r
 
*Bethany C. Gross, Jayda L. Erkal, Sarah Y. Lockwood, Chengpeng Chen, and Dana M. Spence: [http://pubs.acs.org/doi/abs/10.1021/ac403397r Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences], Anal. Chem., 2014, 86 (7), pp 3240–3253, DOI: 10.1021/ac403397r
 
*Philip J. Kitson, Ross J. Marshall, Deliang Long, Ross S. Forgan, and Leroy Cronin: [http://onlinelibrary.wiley.com/doi/10.1002/anie.201402654/abstract 3D Printed High-Throughput Hydrothermal Reactionware for Discovery, Optimization, and Scale-Up], Angew. Chem. Int. Ed. 2014, 53, 12723 –12728 . DOI: 10.1002/anie.201402654
 
*Philip J. Kitson, Ross J. Marshall, Deliang Long, Ross S. Forgan, and Leroy Cronin: [http://onlinelibrary.wiley.com/doi/10.1002/anie.201402654/abstract 3D Printed High-Throughput Hydrothermal Reactionware for Discovery, Optimization, and Scale-Up], Angew. Chem. Int. Ed. 2014, 53, 12723 –12728 . DOI: 10.1002/anie.201402654

Revision as of 03:03, 13 November 2017

This is a literature review for a study on the chemical resistance of 3D printable polymers. This literature review is initially targeted at liquid chemicals which can "attack" 3D printed polymers. In the future gas and plasma attack can be studied but for now it is out of the scope of this lit review.

Introduction

Our target is to find out what 3D printing filaments tolerate the harsh chemicals that we use in semiconductor processing and other cleanroom processes. 3D printing filaments are made from plastics by using additives (plasticizers and colorants), and the vendors rarely or ever provide the information on them to the customer. Therefore, it is not guaranteed that if a certain polymer tolerates, for example, HCl, 3D printed objects made from the same polymer could be used to make custom labware. The chemical resistance of polymers is also affected by chain length, and we do not know if the 3D printing itself causes any changes to that.

Polypropylene (PP) is a 3D printable polymer that can tolerate many chemicals, and the authors of articles listed below have made reaction vessels and microfluidics applications from it. But are we limited to PP? In this we need to search for clues in chemical compatibility charts, also found below.

We will experiment on 3D printing filaments and 3D printed objects by testing them in different chemicals and observing if they swell or dissolve.

Chemicals and processes

List of chemicals

First, the resistance of 3D printable materials at least to the following solvents, acids and solutions is tested:

  • Deionized H2O
  • Isopropanol
  • Acetone
  • Hydrochloric acid (HCl), 37%
  • Ammonia (NH3), aqueous solution 25%
  • Hydrogen peroxide (H2O2), aqueous solution 30%
  • Nitric acid (HNO3)
  • Phosphoric acid (H3PO4)
  • Acetic acid, concentrated

These chemicals are common chemicals used in many laboratories and many semiconductor processing steps, such as in the cleaning of silicon wafers.

Chemical processes

  • Resist strip
  • RCA1 and RCA2 wafer cleaning processes, both in RT and 80°C
  • Al etch
  • Si etch
  • HF dip
  • BHF dip
  • Aqua regia
  • Piranha

3D printing materials and their chemical properties

PLA (Polylactic acid)

One of the most used 3D printing filaments. Various vendors and available in multiple colors. Biodegradable, potentially not very resistant to chemicals.

ABS (Acrylonitrile butadiene styrene)

Co-polyesters

Commercial 3D printing filaments: Inova Co-Polyester, ColorFabb nGen

PETG

PP (Polypropylene)

Resistant to various laboratory chemicals. Quite resistant to acids and bases. Widely used in clean rooms. Is susceptible to oxidation for example peroxides, as it is just a hydrocarbon.

PC (Polycarbonate)

PETT

Taulman T-glase is made of PETT.

FEP

Should be in the sweet spot of fluoropolymers. Low enough melting point to be printable but chemically very durable. According to some data should be resistant to nearly all room temperature liquid chemiclas used in clean rooms.

PEI

Ultem(R) is a commercial plastic which mainly consists of PEI.

Nylon

Taulman Alloy 910 is apparently Nylon-based.

PETG

Polyethylene terephthalate modified with glycol.

Sources

Journal Articles

  • Mark D. Symes, Philip J. Kitson, Jun Yan, Craig J. Richmond, Geoffrey J. T. Cooper, Richard W. Bowman, Turlif Vilbrandt & Leroy Cronin: Integrated 3D-printed reactionware for chemical synthesis and analysis, Nature Chemistry 4, 349–354 (2012), doi:10.1038/nchem.1313
    • Reactionware for inorganic and organic synthesis
    • Reactionware: combines reaction vessel combined with reagents, catalysts, or control of shape to produce a desired result
    • Printed-in: catalysts and in-situ characterization
    • Modifying the geometry changes the outcome of the reaction
    • Robocasting of acetoxysilicone polymer (Loctite 5366): does not require heat, the material hardens quickly.
    • The properties of the material modified by e.g. mixing in conductive carbon black
    • Reusable reactionware, cleaved reactor could be glued shut again with the same material after cutting it open
  • Philip J. Kitson, Mali H. Rosnes, Victor Sans, Vincenza Dragone and Leroy Cronin: Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices, Lab Chip, 2012, 12, 3267–3271. DOI: 10.1039/c2lc40761b
    • Millifluidic devices, made using PP (FFF, 3DTouch printer)
    • Properties of PP: robust, flexible, chemically inert, low cost
    • Three different millifluidic devices were made and demonstrated
    • Containers for solid materials were filled during printing and the printing was continued, which sealed the containers
    • Time and cost-effective method compared to traditional methods, single device takes only hours to build
    • Future interest: solvent compatibility
  • Jennifer S. Mathieson, Mali H. Rosnes, Victor Sans, Philip J. Kitson and Leroy Cronin: Continuous parallel ESI-MS analysis of reactions carried out in a bespoke 3D printed device, Beilstein J. Nanotechnol. 2013, 4, 285–291. doi:10.3762/bjnano.4.31
    • 3D printed tailored deviced linked to a mass spectrometer
    • 3DTouch printer used to print thermoplastic PP
    • PP: low cost, robust, flexible, chemically inert
    • Screw fittings made from PEEK (harder than PP), provides a tighter seal
  • Philip J. Kitson , Mark D. Symes , Vincenza Dragone and Leroy Cronin: Combining 3D printing and liquid handling to produce user-friendly reactionware for chemical synthesis and purification, Chem. Sci., 2013, 4, 3099-3103. DOI: 10.1039/C3SC51253C
    • Reactionware for a multi-step reaction was made, step control by rotating the device and letting gravity do the work -> need for pumps eliminated
    • Approaches from earlier articles combined: vessel was printed from PP, liquid-handling robot was used to functionalize the vessel
    • PP: melting point approx. 160°C, maximum working temperature 150°C
    • PP impermeable to hexane and diethly ether vapors, pressure build-up might need to be mitigated


Chemical resistance charts

Books

Searches

Google:

  • Chemical resistance of 3D printing materials
  • 3D printing filament chemical resistance
  • Chemical resistance of polymers
  • Chemically resistant 3D printing material
  • Chemically resistant 3D printing filament

Scholar:

  • Chemical resistance of 3D printing materials
  • Fused filament fabrication materials resistance
  • Chemical resistance of polymers


Aalto.png This page was part of an Aalto University course 3D Printing of Open Source Hardware for Science

Please leave comments using the discussion tab. The course runs in the Fall semester 2017. It is not open edit.


Contribute to this Literature Review Although this page is hosted by MOST it is open edit. Please feel free to add sources and summaries. If you are new to Appropedia, you can start contributing after you create an account or log in if you have an existing account.