Line 21: Line 21:
[[Image:cut tinplate.PNG|thumb|cut tinplate|200px]]  
[[Image:cut tinplate.PNG|thumb|cut tinplate|200px]]  


Take some Tin plate and copper wire  
Take some tin plate and copper wire  
The sizes are in mm
The sizes are in mm


Line 27: Line 27:




[[Image:fold tinplate double rond copper wire.PNG|thumb|fold tinplate double rond copper wire|300px]]  
[[Image:fold tinplate double around copper wire.PNG|thumb|fold tinplate double around copper wire|300px]]  


[[Image:Tin plate and copper wire .jpg|thumb|Tin plate and copper wire|150px]]
[[Image:Tin plate and copper wire .jpg|thumb|Tin plate and copper wire|150px]]
Line 34: Line 34:
-----------------------------------
-----------------------------------
[[Image:curve tinplate.PNG|thumb|curve tinplate|300px]]  
[[Image:curve tinplate.PNG|thumb|curve tinplate|300px]]  
Curve and rol the cilinder in the right shape.
Curve and roll the cylinder into the right shape.
[[Image:rolling the cilinder.jpg|thumb|rolling the cilinder|150px]]
[[Image:rolling the cylinder.jpg|thumb|rolling the cylinder|150px]]
[[Image:Rolling the edge.jpg|thumb|Rolling the edge|150px]]
[[Image:Rolling the edge.jpg|thumb|Rolling the edge|150px]]
-----------------
-----------------




[[Image:solding the tinplate and copper wire.PNG|thumb|solding the tinplate and copper wire|300px]]  
[[Image:soldering the tinplate and copper wire.PNG|thumb|soldering the tinplate and copper wire|300px]]  
Solding the edges
Soldering the edges
---------------------
---------------------


[[Image:wooden isolator.PNG|thumb|wooden isolator|300px]]  
[[Image:wooden insulator.PNG|thumb|wooden insulator|300px]]  
Make this from beech or pine wood.
Make this from beech or pine wood.


Line 61: Line 61:
-----------
-----------
    
    
[[Image:solding the plus wire.PNG|thumb|solding the plus wire|300px]]  
[[Image:soldering the plus wire.PNG|thumb|soldering the plus wire|300px]]  


[[Image:wire beechewood plastic tinplate .jpg|thumb|wire, beechwood,  plastic, tinplate|200px]]
[[Image:wire beechwood plastic tinplate .jpg|thumb|wire, beechwood,  plastic, tinplate|200px]]


Solding the plus  
Solding the plus  


make shore you solding the plus in the middle and the min on the outside.
make sure you solder the plus in the middle and the minus on the outside.
Find the mark on the electric plus wire.
Find the mark on the electric plus wire.
a lot of wire is markt in diferent way.
a lot of wire is marked in diferent ways.


Mark on the plus wire, you can find more information [[Low_voltage_connection_basics]]
Mark on the plus wire, you can find more information [[Low_voltage_connection_basics]]
Line 76: Line 76:
--------------------------
--------------------------


[[Image:solding the tinplate and min wire.PNG|thumb|solding the tinplate on the min wire|300px]]
[[Image:soldering the tinplate and minus wire.PNG|thumb|soldering the tinplate on the minus wire|300px]]
solding the tinplate and min wire
soldering the tinplate and minus wire


---------------------------
---------------------------


[[Image:hamer tinplate and beeche wood.PNG|thumb|hamer tinplate and beech wood|300px]]
[[Image:hammer tinplate and beech wood.PNG|thumb|hammer tinplate and beech wood|300px]]


Hamer with smal nails
Hammer with small nails


[[Image:hamer NOT through wire.PNG|thumb|hamer NOT through wire|300px]]
[[Image:hamer NOT through wire.PNG|thumb|hammer NOT through wire|300px]]


Be careful you do not hammer the nail through electric wire
Be careful you do not hammer the nail through electric wire
Line 92: Line 92:


[[Image:car Cigar Lighter Socket female .jpg|thumb|car Cigar Lighter Socket female|200px]]
[[Image:car Cigar Lighter Socket female .jpg|thumb|car Cigar Lighter Socket female|200px]]
Cigar Lighter Socket female is finisched
Cigar Lighter Socket female is finished


[[Image:make watertight with rubber.PNG|thumb|make watertight with rubber|300px]]
[[Image:make watertight with rubber.PNG|thumb|make watertight with rubber|300px]]


--------------------------
--------------------------
[[Image:Car cigarette lighter plug dimention.PNG|thumb|Car cigarette lighter plug dimention|300px]]
[[Image:Car cigarette lighter plug dimensions.PNG|thumb|Car cigarette lighter plug dimensions|300px]]


== How to make a car Cigar Lighter plug male ==  
== How to make a car Cigar Lighter plug male ==  

Revision as of 13:52, 8 July 2007

Low voltage living Energie

Car socket 12 volt

How to make a car Cigar Lighter Socket female

Why

With this system there will less mistake about the electric plus and minus polarity.

There is a lot of electrical equipment that fits in this kind of socket.

This socket is a world standard DC 12 volt socket.

How

cut tinplate

Take some tin plate and copper wire The sizes are in mm

cut copper wire


File:Fold tinplate double around copper wire.PNG
fold tinplate double around copper wire
Tin plate and copper wire



curve tinplate

Curve and roll the cylinder into the right shape.

File:Rolling the cylinder.jpg
rolling the cylinder
Rolling the edge


File:Soldering the tinplate and copper wire.PNG
soldering the tinplate and copper wire

Soldering the edges


wooden insulator

Make this from beech or pine wood.


tinplate ring and plastic ring

Assemble


assemble




File:Soldering the plus wire.PNG
soldering the plus wire
wire, beechwood, plastic, tinplate

Solding the plus

make sure you solder the plus in the middle and the minus on the outside. Find the mark on the electric plus wire. a lot of wire is marked in diferent ways.

Mark on the plus wire, you can find more information Low_voltage_connection_basics



File:Soldering the tinplate and minus wire.PNG
soldering the tinplate on the minus wire

soldering the tinplate and minus wire


hammer tinplate and beech wood

Hammer with small nails

hammer NOT through wire

Be careful you do not hammer the nail through electric wire


car Cigar Lighter Socket female

Cigar Lighter Socket female is finished

make watertight with rubber

File:Car cigarette lighter plug dimensions.PNG
Car cigarette lighter plug dimensions

How to make a car Cigar Lighter plug male

Coming soon link: http://en.wikipedia.org/wiki/Car_cigarette_lighter


You can connect the car Cigar Lighter female socket to the :


Links

Cookies help us deliver our services. By using our services, you agree to our use of cookies.