The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 49: | Line 49: | ||
# [[File:Athena_franklin_temp_2.png|thumb|right|The current temperature and what it should be]] '''BEFORE THE FIRST PRINT,''' check to make sure that the thermistor is working properly. This can be checked by looking at the current temperature located on the left middle of the page. It should read within 5 to 10 degrees of 20. (depending on room temperature). If it reads a negative number, then there is something wrong with the thermistor.{{clear}} | # [[File:Athena_franklin_temp_2.png|thumb|right|The current temperature and what it should be]] '''BEFORE THE FIRST PRINT,''' check to make sure that the thermistor is working properly. This can be checked by looking at the current temperature located on the left middle of the page. It should read within 5 to 10 degrees of 20. (depending on room temperature). If it reads a negative number, then there is something wrong with the thermistor.{{clear}} | ||
# Using a gluestick, apply a thin layer of glue to the mirror that covers the whole mirror | # Using a gluestick, apply a thin layer of glue to the mirror that covers the whole mirror. | ||
# [[File:Athena_franklin_browse.png|thumb|right|The location of "Browse" button. (It may be a "Choose File" button)]] Open Franklin, and locate the "Browse" button. '''The "Browse" button may be a "Choose File" instead!''' {{clear}} | # [[File:Athena_franklin_browse.png|thumb|right|The location of "Browse" button. (It may be a "Choose File" button)]] Open Franklin, and locate the "Browse" button. '''The "Browse" button may be a "Choose File" instead!''' {{clear}} | ||
# [[File:Athena_franklin_browse_load.png|thumb|right|The "Browse" dialogue box.]] A dialogue box opens. Navigate to where the .gcode file from Cura is saved. Load the File. The filename should appear to the right of the Browse/Choose File button. {{clear}} | # [[File:Athena_franklin_browse_load.png|thumb|right|The "Browse" dialogue box.]] A dialogue box opens. Navigate to where the .gcode file from Cura is saved. Load the File. The filename should appear to the right of the Browse/Choose File button. {{clear}} |