Template:TissueDB Material Simulation Requirements/doc

Overview

{{TissueDB Material Simulation Requirements}} renders the Simulation Requirements section for TissueDB Materials pages. This section specifies what fidelity properties the material must achieve across the four domains: Visual, Tactile, Functional, and Feedback.

Note: Per Dr. Mohr directive, Visual and Tactile domains are ACTIVE. Functional and Feedback domains are NOT_YET — include only if source-traced evidence exists.

This template is placed inside the {{TissueDB Material Layout}} template's simulation_requirements parameter.

Placement

{{TissueDB Material Layout
| simulation_requirements =
{{TissueDB Material Simulation Requirements
| content = '''Visual:''' Material should match the target tissue colour within one Munsell step. Surface texture should show realistic granularity under direct lighting.

'''Tactile:''' Shore hardness within 10% of target tissue value. Elastic recovery after deformation should occur within 2 seconds.
}}
}}

Parameters

Parameter	Type	Required	Description	Source
content	String	Yes	Prose describing simulation requirements across fidelity domains. Must include quantitative values where available. Source-traced to published measurements or Dr. Mohr directives.	SELF Developer Playbook (Jan 2026); Dr. Mohr editorial directive

Content Rules

Uses prose format — not a wikitable on Materials pages.
Four domains: Visual (ACTIVE), Tactile (ACTIVE), Functional (NOT_YET), Feedback (NOT_YET).
Include quantitative values where available (measurements, tolerances, units).
All requirements must be source-traced.
No fabricated fidelity ratings or assessment scales (AP-0308-01, AP-0316-01).

Renders the Simulation Requirements section content for TissueDB Materials pages.

Template parameters
Parameter		Description	Type	Status
Simulation requirements content	`content`	Prose describing fidelity requirements across Visual, Tactile, Functional, and Feedback domains	String	required