Search by property

Jump to navigation Jump to search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Has description" with value "Carpenter knife". Since there have been only a few results, also nearby values are displayed.

Showing below up to 26 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)


    

List of results

  • Amorphous silicon solar cell  + (Amorphous silicon is a non-crystalline allotropic form of silicon that is bonded tetrahedrally. Amorphous silicon is a solar cell technology that has a high absorption coefficient but these solar cells can be instable when light hits the material.)
  • Adjustable Heated Bed  + (An adjustable heated bed that we could adjust to heat only the parts that we want to print on. (limit use of power to what is needed))
  • Bike Cargo Rack  + (An affordable 3D printable cargo rack was designed for hauling goods or personal items)
  • Ankle Brace Night Splint  + (An easy treatment in the earlier stages of the injury can be the use of ankle splints during sleep which helps lengthen the plantar fascia to reduce inflammation.)
  • 3-D printing open-source click-MUAC bands for identification of malnutrition  + (An effective method for the diagnosis of severe acute malnutrition is the measurement of the middle upper arm circumference (MUAC).)
  • Electric Whisk  + (An electric hand-whisk is a handheld mechanism used for whisking, beating or stirring different liquids. This design incorporates 3D printable parts.)
  • Inverters  + (An inverter converts DC electricity into AC)
  • Hot Water Solar Repair, Humboldt County  + (An open looped, solar hot water system was repaired in Humboldt County. Both of the dribble valves were replaced for this repair.)
  • Solar hot water repair, Humboldt County.  + (An open looped, solar hot water system was repaired in Humboldt County. Both of the dribble valves were replaced for this repair.)
  • Smart Phone Adaptive Otoscope  + (An otoscope is a medical instrument or devAn otoscope is a medical instrument or device used to examine of the eardrum and the passage of the outer ear, which can be dificult to see to the naked eye. From an otoscope a medical professional or health care provider can diagnose or recognize ear infections, fluid in the ears, tearing of the eardrum and more.the ears, tearing of the eardrum and more.)
  • 3D Printed Otoscope  + (An otoscope is simple device used in the diagnosis of ear, nose, and throat diseases.)
  • Sunbrella  + (An umbrella is a mighty appropriate tool in Humboldt County, as is a cooker that utilizes a clean renewable resource. Thus, we decided to combine the two to make an incredible apparatus: an umbrella in the rain, a solar cooker in the Sun... a Sunbrella!)
  • Chicken Feed Holder  + (Appropriate chicken feed holders can help keep feed isolated from contamination such as feces and minimize the outbreak of diseases.)
  • Parametric elbow splint  + (Arm injuries are a very common occurrence, especially with children and younger adults that are working in manual labor)
  • Aurora Solar Software  + (Aurora Solar Software is a solar design soAurora Solar Software is a solar design software that allows for the remote design of solar projects, estimate energy production and utility bill savings, and offer different financing scenarios using some special features such as consumption profile estimations, shading analysis, performance simulations and much more.is, performance simulations and much more.)
  • AutoInjector  + (AutoInjectors are a spring-loaded device that aides in delivering the proper dosages of certain medicines. Prototype scad files for Autoject El replica are found in external links.)
  • 7up  + (Bicycle part)
  • Bicycle Brake Caliper  + (Brake Calipers are an important component required to build a bicycle.)
  • Parametric quick release buckles  + (Buckles are very useful and found on a wide variety of items; however, if one breaks, it is hard to find a cheap replacement. Since buckle sizes vary depending on the application, I made a fully parametric OpenSCAD design.)
  • Solar Water Heater, La Quinta, California  + (Build a solar batch water heater and install at my residents in La Quinta, California.)
  • Sunny Brae Middle School Garden  + (Building a garden at Sunny Brae Middle School is one step towards creating an experiential learning facility designed to educate middle school kids about sustainable agriculture)
  • CCAT Raised Garden Beds  + (Building garden beds and growing within a controlled environment will make the plants grow healthier and also will prevent toxic chemicals from leaching their way into whatever will be grown in the beds.)
  • Butterfly Handlebars for bike  + (Butterfly bicycle handlebars designed to fit 25.4 mm clamp.)
  • Contoured Spigot for 5-gallon buckets  + (By modeling a bucket with just its top and bottom diameters and its average thickness, it's easy to design a spigot with contours that fit well. This design is expected to fit a wide range of bucket sizes effectively.)
  • Clamps with gearing system  + (By using a geared system, much more force can be placed on objects compared to an un-geared clamp.)
  • Clamps: "Wooden" Handscrew Style  + (Clamps are an essential tool in building just about anything from scratch. This OSAT is intended to take the place of woodworking clamps.)
  • Commode  + (Compact, cheap commodes could be used in disaster relief operations, hospitals, and households.)
  • Compound parabolic concentrators  + (Compound parabolic concentrators (CPCs) caCompound parabolic concentrators (CPCs) can be additions to solar water stills, solar water pasturizers, and solar cookers. CPCs can increase the output of these devices along with their efficiency by concentrating the sunlight to make the device more effective.unlight to make the device more effective.)
  • CCAT papercrete clayslip demo wall  + (Constructed, with the help of CCAT and stuConstructed, with the help of CCAT and student volunteers, from stick frame and infilled with papercrete and clay-slip straw with a recycled brick base, and covered by a cedar shingle roof. This wall will then have information signs attached for visitors of CCAT campus.igns attached for visitors of CCAT campus.)
  • Laser trip-wire shutoff  + (Construction of a laser trip-wire to shut off a Delta printer (specifically MOST delta RepRap) in the event of a detached hotend nozzle)
  • Hot  + (Construction of a laser trip-wire to shut off a Delta printer in the event of a detached hotend nozzle or rod)
  • Cotton to yarn maker  + (Cotton obtained from the farm can be extracted into yarn with this tool.)
  • Crawler Harness Holder  + (Crawler Harnesses can be cumbersome to keep in your tackle box without a holder and more often than not, if you're walleye fishing, you have a tackle box FULL of crawler harness holders just to keep up)
  • Solar charger  + (Defines what a solar charger is, how it works, and provides a link to a list of solar chargers.)
  • Updated Forestry Densiometer (Smartphone Capable)  + (Densiometers are simple tools used by foresters all over the world to roughly estimate the amount of foliage coverage in a certain area of trees.)
  • Dental Chair  + (Dental Chair (SCAD files not provided))
  • WaterPod Soil-less Growing System  + (Design a system that would grow food for the occupants of the barge without the presence of soil.)
  • Rainwater Catchment J Gnarly  + (Design and install a safe, easy to use and maintainable rain water catchment system.)
  • Medical Tweezers  + (Designed in response to a request for MediDesigned in response to a request for Medical Tweezers from Field Ready. This is a versatile design for Medical Tweezers as it's designed in openSCAD to be customized to the user's desire, such as number or teeth, grip points, space between each grip, size of the tip, and etcetween each grip, size of the tip, and etc)
  • CCAT Waschen und Spülen Toilette  + (Die "Waschen & Sp√ºlen" ist ein umweltDie "Waschen & Sp√ºlen" ist ein umweltwissenschaftliches Projekt der Humboldt State Universit√§t, welches durch Jeffrey Steuben, Annie Welbes und Tim Dower realisiert und in der Toilette im Untergeschoss des CCAT umgesetzt wurde. Es handelt sich um eine Modifikation der Toilette, die es dem Benutzer erm√∂glicht Wasser zu sparen, in dem das Abwasser des H√§ndewasschens zum Sp√ºlen der Toilette wieder verwendet wird.um Sp√ºlen der Toilette wieder verwendet wird.)
  • Walnut Cracker  + (Dried nuts such as walnut are grown in couDried nuts such as walnut are grown in countries like Brazil and India Predominantly. For these small scale farmers, cracking walnut with hand crusher is a tedious task and to overcome the issues of ergonomics and usability, the following walnut cracker is designed. the following walnut cracker is designed.)
  • ESCO  + (ESCO stands for Energy Service Company. ESESCO stands for Energy Service Company. ESCOs provide services that include developing, designing, and (sometimes) financing energy efficiency projects, installing and maintaining the energy efficient equipment involved, measuring, monitoring, and verifying the project’s energy savings, and assuming the risk that the project will save the amount of energy guaranteed.will save the amount of energy guaranteed.)
  • Electric Mountain Board  + (Electric Mountain Board)
  • Measuring DC electrical energy production from micro-renewables  + (Energy monitoring electronics)
  • Athena Engraver mod  + (Engraver mod on the Athena II printer allows you to engrave various designs on acrylic sheets, plexiglass, cardboard and/or wooden surfaces.)
  • OSAT-Protractor  + (First, this will be useful in education, where protractors can be used to help teach geometric concepts. Additionally, they can be used in construction to make sure angle measurements are made accurately.)
  • Flowmeter  + (Flowmeters are the devices that are used to measure the flow of liquid & gases that pass through them. This flowmeter is 3D printable.)
  • Chris's ENGR305 Solar Food Dehydrator  + (Food dehydration is both a desirable and aFood dehydration is both a desirable and appropriate technology for many reasons which include increasing the shelf-life of food without having to use refrigeration, and reducing product size which can maximize storage space. Also, the process of dehydration is used to enhance foodstuffs directly (e.g. jerky, fruit leather) and indirectly (e.g. spices).uit leather) and indirectly (e.g. spices).)
  • Newspaper briquet maker  + (Fulfills need to turn waste newspaper and Fulfills need to turn waste newspaper and other light paper products into small burnable briquettes. This helps to turn waste in to a usable fuel source, and also allows the paper to burn much longer and more efficiently than just burning the unprocessed paper.y than just burning the unprocessed paper.)
  • Fume Extractor  + (Fume extractor is used in laboratories to extract harmful chemical fumes)