This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 21:26, 2 May 2017 | LaserBayCableManagementMultiple.jpg (file) |  |
2.98 MB | all three of the laser bay multiple Ethernet cable management brackets | 1 |
| 21:25, 2 May 2017 | LaserBayCableManagementSingle.jpg (file) |  |
2.81 MB | Single laser bay cable management bracket | 1 |
| 21:18, 2 May 2017 | LaserBayCableManagerUpper.jpg (file) |  |
333 KB | Upper laser bay cable and pneumatic tubing management bracket. | 1 |
| 21:17, 2 May 2017 | LaserBayCableManagerLower.jpg (file) |  |
349 KB | Lower part of the lasersaur laser and electronics bay cable and pneumatic tubing management bracket | 1 |
| 21:09, 2 May 2017 | EthernetManagementBrackets.jpg (file) |  |
2.59 MB | Arrangement of 3 Ethernet cable management brackets | 1 |
| 21:08, 2 May 2017 | EthernetBracket.jpg (file) |  |
2.7 MB | Single Ethernet bracket pair | 1 |
| 21:04, 2 May 2017 | EthernetCableManagerUpper.jpg (file) |  |
305 KB | Upper half of the Ethernet cable manager bracket | 1 |
| 21:02, 2 May 2017 | EthernetCableManagerLower.jpg (file) |  |
310 KB | Lower mount bracket for a single Ethernet cable | 1 |
| 20:50, 2 May 2017 | MountedYLimits.jpg (file) |  |
736 KB | Min/Max Y limit switch hardware mount locations for one side, copy this configuration on both x min and x max sides of the laser cutter | 1 |
| 20:44, 2 May 2017 | MountedYLimit.jpg (file) |  |
3.11 MB | Close up of individual y-min/max limit switch mount hardware configuration | 1 |
| 20:43, 2 May 2017 | YLimitHardware.jpg (file) |  |
3.24 MB | Hardware to mount each individual y min and max limit switches | 1 |
| 20:12, 2 May 2017 | LimitMount.jpg (file) |  |
312 KB | Y Max and Min Limit Switch Mounts | 1 |
| 17:43, 2 May 2017 | GantryPlateUniversal.jpg (file) |  |
316 KB | Universal gantry side mount plate, 1 regular and 1 mirrored copy are needed for the lasersaur linear motion reconstruction | 1 |
| 21:40, 28 April 2017 | FullMount.jpg (file) |  |
3.25 MB | Both Sided Rail Guide Mounts | 1 |
| 21:39, 28 April 2017 | StockHardwareConfiguration.jpg (file) |  |
2.81 MB | Rail Mount Hardware Configuration | 1 |
| 21:37, 28 April 2017 | StockMounted.jpg (file) |  |
3.24 MB | Mounted Rail Stock | 1 |
| 21:36, 28 April 2017 | Drillandpunch.jpg (file) |  |
3.35 MB | Drilled aluminum stock | 1 |
| 21:07, 28 April 2017 | ConnectedStepper.jpg (file) |  |
3.56 MB | Stepper motor wired to 4 pin male connector | 1 |
| 20:57, 28 April 2017 | NOLimitSwitch.jpg (file) |  |
3.37 MB | Normally Opened Limit Switch | 1 |
| 20:35, 28 April 2017 | Lasersaur remove elements photo.jpg (file) |  |
153 KB | Lasersaur component removal | 1 |
| 19:18, 28 April 2017 | SquigglyCut.jpg (file) |  |
2.84 MB | squiggly lines cut by the laser cutter | 1 |
