GPS Belt Clip
| Manufacturing files | https://www.youmagine.com/designs/garmin-gps-clip |
|---|---|
| Hardware license | CERN-OHL-S |
| Certifications | Start OSHWA certification |
GPS Mount
Project developed by [User:vmmclain|Vincent McLain] Template:Status Template:Status
Abstract
- As a member of Superior Search and Rescue, I find myself using a GPS frequently during training exercises or actual searches. At times, it can be inconvenient to continuosly remove my GPS from a pocket or backpack in order to navigate. This GPS clip is an attempt to alleviate that issue by allowing a user to mount a GPS to a belt, backpack strap, or other webbing attachment.
Bill of Materials
- 1.75mm Filament
- 2-Part Plastic Epoxy
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
Skills and Knowledge Necessary to Make the OSAT
- 3D printer and slicing software for the provided STL's
Technical Specifications and Assembly Instructions
- Both the mount and clip will printed in under a half an hour
- Both files should be printed at 0.2 mm layer height with a 30% infill.