This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- Economic impact of substituting solar photovoltaic electric production for tobacco farming + (Economic Impact of Solar vs. Tobacco Farming)
- Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S. + (Economic Potential of Adaptive Aids for Arthritis Patients in the U.S.)
- Economic Savings for Scientific Free and Open Source Technology: A Review + (Economic Savings for Free and Open Source Tech)
- Emerging economic viability of grid defection in a northern climate using solar hybrid systems + (Economic Viability of Grid Defection in a Northern Climate)
- The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids + (Economics of Classroom 3-D Printing Learning Aids)
- Economics of Open-Source Solar Photovoltaic Powered Cryptocurrency Mining + (Economics of Solar PV-Powered Cryptocurrency Mining)
- Preliminary Automated Determination of Edibility of Alternative Foods: Non-Targeted Screening for Toxins in Red Maple Leaf Concentrate + (Edibility of Alternative Foods: Toxin Screening)
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films + (Effect of Gas Mixtures on ITO Films)
- The Effects of PLA Color on Material Properties of 3-D Printed Components + (Effects of PLA Color on 3-D Printed Material Properties)
- A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules + (Effects of Surface Coatings on Snow Shedding)
- Demonstration of a simple encapsulation technique for prototype silicon solar cells + (Encapsulation Technique for Prototype Silicon Cells)
- Prediction of energy effects on photovoltaic systems due to snowfall events + (Energy Effects on PV Systems Due to Snowfall)
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System + (Energy Payback Time of Solar-Powered Recyclebot)
- Enhanced Dye-Sensitized Solar Cell Performance using Strontium Titanate Perovskite Integrated Photoanodes Modified with Plasmonic Silver Nanoparticles + (Enhanced Dye-Sensitized Solar Cells with Silver)
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products + (Environmental Impact of Distributed 3-D Printing of Polymer Components)
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products + (Environmental LCA of Distributed 3-D Printing vs. Conventional Manufacturing)
- Equitable Research Capacity Towards the Sustainable Development Goals: The Case for Open Science Hardware + (Equitable Research Capacity for Sustainable Development Goals: Open Science Hardware)
- Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application + (Etching's Influence on Silicon Structure for Solar Cells)
- Uniplanar External Fixation/Pre-Learning Clinical Confidence Assessment + (External Fixation/Pre-Learning Clinical Confidence)
- Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography + (Fabricating Ordered 2-D Nano-Structured Arrays)
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament + (Fair Trade Standards for Ethical 3-D Printing Filament)
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun + (Feeding Everyone: Solving Food Crisis in Catastrophic Scenarios)
- Foam-based floatovoltaics: A potential solution to disappearing terminal natural lakes + (Foam-based Floatovoltaics for Terminal Natural Lakes)
- Adjusting and testing the Full Belly Project Universal Nut Sheller + (Full Belly Project Universal Nut Sheller)
- Fully dense SiOC(N) cellular structures by integrating FFF 3-D printing with polymer derived ceramics + (Fully Dense SiOC(N) Cellular Structures via FFF 3-D Printing)
- A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages + (GHG Emission Liabilities & Renewable Energy Value)
- Simulations of Greenhouse Gas Emission Reductions from Low-Cost Hybrid Solar Photovoltaic and Cogeneration Systems for New Communities + (GHG Emission Reductions from Hybrid Solar PV Systems)
- Gamification for social perception: introducing scientific literacy to dabblers in citizen science + (Gamification for Scientific Literacy in Citizen Science)
- Geographical Dependence of Open Hardware Optimization: Case Study of Solar Photovoltaic Racking + (Geographic Optimization of Solar PV Racking)
- Geographic potential of shotcrete photovoltaic racking: Direct and low-concentration cases + (Geographic Potential of Shotcrete PV Racking)
- Global distribution of forest classes and leaf biomass for use as alternative foods to minimize malnutrition + (Global Distribution of Forest Classes for Alternative Foods)
- Global Surgical Training Challenge/Good Practices For Content Creation + (Global Surgical Training Challenge/Content Practices)
- Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing + (Green Fab Lab: Waste Polymer-Based Additive Mfg.)
- Economics of Grid-Tied Solar Photovoltaic Systems Coupled to Heat Pumps: The Case of Northern Climates of the U.S. and Canada + (Grid-Tied PV & Heat Pumps: Northern Climates)
- Finite Difference Heat Exchanger Model: Flow Maldistribution with Thermal Coupling + (Heat Exchanger Model: Flow Maldistribution & Thermal Coupling)
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger + (Heat Transfer in Additive Manufactured Polymer Heat Exchanger)
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers + (Home Manufacturing in the Developed World: ROI for 3-D Printers)
- Humeral Fracture Fixation/Post-Learning Clinical Confidence Assessment + (Humeral Fracture Fixation/Clinical Confidence)
- Humeral Fracture Fixation/Confirm 3D Printing and Delivery Capabilities + (Humeral Fracture Fixation: 3D Printing & Delivery)
- Humeral Fracture Fixation/Design for Extreme Accessibility in Low Resource Settings + (Humeral Fracture Fixation: Accessibility in Low-Resource Settings)
- The Internet and other ICTs as tools and catalysts for sustainable development + (ICTs as Tools for Sustainable Development)
- Finding Ideal Parameters for Recycled Material Fused Particle Fabrication-Based 3D Printing Using an Open Source Software Implementation of Particle Swarm Optimization + (Ideal Parameters for Recycled Material 3D Printing)
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials + (Identifying Prior Art in 3-D Printing)
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid + (Improved Model and Validation of Deformation in FFF of PLA)
- Towards Smart Monitored AM: Open Source in-Situ Layer-wise 3D Printing Image Anomaly Detection Using Histograms of Oriented Gradients and a Physics-Based Rendering Engine + (In-Situ Layer-Wise 3D Printing Anomaly Detection)
- Synthetic-to-real Composite Semantic Segmentation in Additive Manufacturing + (In-Situ Layer-Wise 3D Printing Anomaly Detection)
- Inhibition of growth of S. epidermidis by hydrothermally synthesized ZnO nanoplates + (Inhibition of S. epidermidis with Hydrothermally Synthesized ZnO)
- Innovation through collaboration: scaling up solutions for sustainable development + (Innovation Collaboration: Scaling Solutions for Development)
- A new model for enabling innovation in appropriate technology for sustainable development + (Innovation in Tech for Sustainable Development)
- How to install FLIR Lepton Thermal Camera and applications on Raspberry Pi + (Install FLIR Lepton Thermal Camera on Raspberry Pi)
- Integrative Risk Management for Catastrophe Destroying 10-20% of Global Food Supply + (Integrative Risk Management: 10-20% Food Supply Loss)