Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "WetLand aquaponic system"

From Appropedia
Jump to: navigation, search
(Background)
(Tags: ANON EDIT. To be patrolled., n)
(Background)
(Tags: ANON EDIT. To be patrolled., n)
Line 12: Line 12:
 
== Background ==
 
== Background ==
  
Team Hooked on ‘Ponics was started by students at [http://www.humboldt.edu Humboldt State University] in the [[Engr215|Engineering 215 - Introduction to Design]] taught by[[User:Lonny | Lonny Grafman]], during the Fall of 2013. The project required the team to construct an aquaponic system for the WetLand project. The WetLand project’s mission is to present the world of water and wetlands by constructing an island-based ecosystem that acts as a mobile habitat floating on the Delaware River in Philadelphia. The floating barge will be open to the public to educate people about sustainable uses of resources and about water-based ecosystems.
+
Team Hooked on ‘Ponics was started by students at [http://www.humboldt.edu Humboldt State University] in the [[Engr215|Engineering 215 - Introduction to Design]] class taught by[[User:Lonny | Lonny Grafman]], during the Fall of 2013. The project required the team to construct an aquaponic system for the WetLand project. The WetLand project’s mission is to present the world of water and wetlands by constructing an island-based ecosystem that acts as a mobile habitat floating on the Delaware River in Philadelphia. The floating barge will be open to the public to educate people about sustainable uses of resources and about water-based ecosystems.
  
 
== Problem Statement and Criteria  ==
 
== Problem Statement and Criteria  ==

Revision as of 18:17, 3 December 2013

ENGR215 Project Page in Progress
This page is a project page in progress by students in Engr215. Please refrain from making edits unless you are a member of the project team, but feel free to make comments using the discussion tab. Check back for the finished version on December 15th, 2013.

Final design of aquaponic system.

Abstract

The purpose of this project is to create an aquaponic system that produces food for up to three people who will be living on the WetLand barge in Philidelphia during Summer 2014. It will also provide inspiration to visitors by demonstrating a closed looped food growing system that can be easily replicated. The project will be a collaborative effort including the WetLand project, residents on the WetLand barge, Humboldt State University, Team Hooked on ‘Ponics, the local community in Arcata, and the community of Philadelphia.

Background

Team Hooked on ‘Ponics was started by students at Humboldt State University in the Engineering 215 - Introduction to Design class taught by Lonny Grafman, during the Fall of 2013. The project required the team to construct an aquaponic system for the WetLand project. The WetLand project’s mission is to present the world of water and wetlands by constructing an island-based ecosystem that acts as a mobile habitat floating on the Delaware River in Philadelphia. The floating barge will be open to the public to educate people about sustainable uses of resources and about water-based ecosystems.

Problem Statement and Criteria

The objective of this project is to design an aquaponic system capable of providing food for the occupants of the WetLand Project, while also showing the public a sustainable way to grow food and fish. The aquaponic system will be contained in a greenhouse located on the barge. It will be used by WetLand residents for 3 months in Summer 2014 with minimal maintenance tasks each day to ensure proper functioning of the system. Table 1 shows a list of criteria created by the Hooked on ‘Ponics team members in collaboration with WetLand team members. These criteria are weighted for importance to help the team choose a design that best fits the client’s needs.

Table-1: Criteria and Their Importance
Criteria Importance Description
Maintainability 9 Residence on barge must set aside 30 minutes/day to assure system is working properly
Cost 7 Less than $400
Safety 7 Child proof and no one comes into contact with the anaerobic water
Productivity 6 Produce enough food for three people
Aesthetics 5 Aesthetically appealing for client and visitors
Level of Embodied Energy 4 To use as many recyclable and renewable materials

Description of Final Design: Aquaponic System

Aquaponic System Features

Figure 1: CAD Drawing of Aquaponic System

Tanks:

The fish tank is made from a used, plastic cube called an intermediate bulk container. The fish tank holds approximately 250 gallons of water with 15 or more fish. The grow bed is made from 1/3 of a used intermediate bulk container and is filled with granular rocks for vegetation to be planted in. The last tank is the sump tank, made from the other 2/3 of an IBC, and holds around 100-200 gallons of water depending on the amount of water that is being cycled throughout the whole system. All tanks are painted with several coatings of mistint to block light.

Pipes and Hosing:

1 inch PVC piping runs from the fish tank to the sump tank. Water levels are controlled by using hosing for plumbing. Piping also runs from the grow bed to the sump tank. This creates a closed loop system for water and nutrients to be cycled through each tank.

Auto-Siphon:

The granular grow bed contains an auto-siphoned bell that drains to the sump tank. The auto-siphon drains water from the grow bed in a cyclical timeframe (not sure exact time yet)

Water Pumps:

Within the sump tank, there are 2 water pumps that direct the flow of water from the sump tank, to the fish tank and grow bed.

Aerator:

An aerator hangs outside the sump tank. It uses a hose that goes into the sump tank to increase dissolved oxygen levels in the water, in order for the fish to thrive.

Design

The fish tank, sump tank, and grow bed are made from two recycled intermediate bulk containers (IBC). One complete IBC is used for the fish tank and holds up to 1,000 Liters. The second IBC is cut into two sections to form the grow bed and sump tank.

The water level controller passively siphons water from the fish tank to the sump tank. This reduces the energy required the run the system's pumps and ensures that the fish tank will never be drained completely.

From the sump tank, water is pumped into the grow bed where the plants' roots clean the water and the gravel filters out and large particulate matter. After the grow bed is filled completely, the water is drained by the autosiphon and released back into the fish tank where the cycle begins again.

Design Considerations

The system was designed to be easy to maintain for people unfamiliar with aquaponic systems. This criteria influenced many aspects of the final design-- most notably, the grow bed. While other parts of an aquaponic system (fish tank and sump tank) are fairy standard, there a variety of options for grow beds. Some of these options required special care and frequent testing and adjusting of water conditions, as well as the installation of additional filters. Ultimately we decided on using a granular grow bed because of simplicity and ease of use. No additional filters are needed, and it requires the least amount human intervention to maintain optimal water conditions.

Energy efficiency was another design priority due to the nature of WetLand. Because the barge would not be connected to the electric grid, all lights, appliances and systems on the barge would only be able to operate on energy generated by the on-board solar panels. This limitation was especially challenging for our system which required air and water to be constantly circulating in the sytem. With this in mind, we sized our pumps and our system to operate on the smallest wattage possible.

Results

The Aquaponic System is successful in producing enough produce and fish for up to three residence living among the WetLand barge. This aquaponic system can sustain high humidity and temperature levels. This will allow the client to pick and choose what type of fruits/vegetables and fish they would prefer to grow.

D.I.Y

How To Build An Aquaponic System
ImageStep
Intermediate Bulk Container (IBC) Step 1 : Description
photo Step 2 : Description
photo Step 3 : Description
photo Step 4: Description
photo Step 5: Description
photo Step 6: Description
photo Step 7: Description
photo Step 8: Description
photo Step 9: Description
photo Step 10: Description
photo Step 11: Description

Materials/Costs

Materials for the design of the aquaponics system were obtained by buying new, used, and discounted items. Some parts were also donated to the team. Table 2 details the total materials and costs for constructing the aquaponics system.


Table-2: Materials and Costs
Quantity Material Discounted Price ($) Full Price ($)
1 Bi metal Blade 3.75 3.99
1 1/2" x 25' marine grade hose 12.21 12.99
1 IBC tote (Fish Emul.) 100.00 250.00
1 Eco 396 Submersible Pump 20.40 27.95
2 Ecoplus small round air stone 5.60 7.80
1 Clear tubing (10ft) 1.00 1.50
1 Elemental O2 Pump (254 GPH) 19.45 23.95
1 IBC tote (Wood Vinegar) 50.00 250.00
1 pH Testing Kit 19.35 19.35
1 Clear tubing (12ft) 1.20 1.80
10 1" PVC Pipe 4.90 5.19
2 4" ABS Pipe 5.58 5.91
1 PVC Coupler 10.51 11.14
1 Poly Bulkhead 1 1/4 6.95 6.95
1 MIP adapt sxm 1 1/4 1.50 3.00
1 s/40 Bush SxS 1 1/4 x 1 0.99 1.98
1 Mistint Paint 6.99 20.00
1 Clear Caulking 9.99 9.99
1 2x4x8 Fir 9.33 3.11
Total Cost $289.71 $660.60

Design Cost

Design cost is measured in hours. The total hours spent on the creation of the aquaponic system are 200 hours with the total hours being broken down into representative segments shown in the figure below.

Figure 2: Pie chart in design hours spent on each design section for the aquaponic system.

Maintenance Cost

Maintenance cost is measured in minutes per day. The total minutes per day for the aquaponic system is 30 minutes/day with the total being broken down into segments as shown in the figure and table below.

Figure 3: Pie chart on minutes/day spent on maintaining the aquaponic system.


Table-3: Maintenance the amount of time it takes
Maintenance Time (minutes)
Check pH 5
Feed Fish 5
Weed out Grow Bed 5
Clean out Dead Fish 5
Watch System to Ensure Proper Usage 10

Video

Discussion

Your discussion.

Next steps

The next steps.

References


Hooked on 'Ponics