(→Cost) |
|||
Line 33: | Line 33: | ||
*A detailed BOM of the chemicals used to make it with links to sources and prices in a | *A detailed BOM of the chemicals used to make it with links to sources and prices in a | ||
table - and total cost. | table - and total cost. | ||
===Purification Methods=== | ===Purification Methods=== |
Revision as of 17:14, 13 October 2013
Template:MY3701
Introduction
Our team is trying to develop a way to print a Zinc Antimonide (ZnSb) semiconductor transistor.
Background
- Team
- Brief description of the semiconductor material with a link to the manufacturer(s) or suppliers
Benefits of 3D Printing
- Mike
- A description of how it could be 3D printed
Materials Required
- Alisha
MSDS
- Alisha
- Links to MSDSs for each
Steps of Synthesizing
- Alisha
- A detailed description of the steps, equipment and amounts of chemicals needed to
synthesize the semiconductor ink with references to sources.
Dia Workflow
- Alisha
- Create a diagram in Dia outlining your workflow to summarize the steps, and the
equipment, processes, chemicals, steps involved. Show alternate paths and discuss the optimal route and the metrics for choosing it.
Cost
- Alisha
- A detailed BOM of the chemicals used to make it with links to sources and prices in a
table - and total cost.
Purification Methods
- Robert
- Outline purification methods and the methods needed to obtain acceptable purity for your
material.
Testing
- Robert
- A description of the testing procedures, equipment and specifications for the equipment
used to determine if you obtained your target compound.
Material Properties
- Robert
- A list of best in class material properties for your ink.
Characterization
- Nate
- Discuss the characterization methods and how they could be adapted for in-situ analysis.
Applications
- Nate
- List and describe applications of this semiconductor if it is printed.
Electronic Diagram
- Nate
- Make a basic diagram for an electronic device that could use this semiconductor and post
diagram in your project page.
OpenSCAD
- Mike
- Design the semiconductor portion of the device in OpenSCAD, paste the code directly
into your project page
STL
- Mike
- Post the STL of your design and a link to the STL on your project page.
Contacts
Alisha Clark | Robert Cooley | Nathaniel Musser | Michel Knuden |
user:Alishac | user:Rjcooley | user:Namusser | user:M.Knudsen |