No edit summary |
No edit summary |
||
| Line 27: | Line 27: | ||
* Cast Polymer: [http://reprap.org/wiki/PourStrap design 1] | * Cast Polymer: [http://reprap.org/wiki/PourStrap design 1] | ||
* General ideas: [http://reprap.org/wiki/Thermoplast_Extruder_Hints different materials and their strengths] | * General ideas: [http://reprap.org/wiki/Thermoplast_Extruder_Hints different materials and their strengths] | ||
==Boards for Reprap=== | |||
* electronic circuit mounting board: | |||
#; *[http://reprap.org/mediawiki/images/8/8b/Mendel_motherboard-plate.par.png schematics] | |||
#; *[ | |||
* Stepper motor mounting board: | |||
#; *[http://reprap.org/mediawiki/images/8/8e/Stepper-plate.par.png skematics] | |||
#; *solid edge file: [[File:stepper-plate.par]] | |||
Revision as of 18:08, 13 July 2010
Mendel Reprap Extruder Types
1) Spring Head: Allows the extruder to move over ridges that blocks its path
Instructions: No
Works:Yes
Links: [1]
2) Granular Extruder: Allows the use of pellets to make parts instead of a plastic rod
Instructions: Some, not detailed
Works:Needs Improvement
Links:[2]
[3]
3) Spool Head: prints metal, only limited shapes tested
Instructions:Some, not detailed
Works: Needs more testing on other shapes
Links:[4]
Other Printer Beds
- Heated bed: design 1,
- Wooden bed: Mendel uses wooden base,entire wooden mendel, wood ratings, [
- Cast Polymer: design 1
- General ideas: different materials and their strengths
Boards for Reprap=
- electronic circuit mounting board:
- *schematics
- *[
- Stepper motor mounting board:
- *skematics
- *solid edge file
- File:Stepper-plate.par
Extruder Help
General Tips [5]
Reprap Parts and Where to Order
The current parts that have been ordered for the reprap are listed in this document below. I will update this document as more parts are ordered.Media:parts_for_reprap.odt
Links
- Almost totally plastic system that can move in 3 dimentions called Sarrus Linkage Mark III, and attachment for an extruder is being worked on.