Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "User:C Blair"

From Appropedia
Jump to: navigation, search
(General 3D Printing Links)
(General 3D Printing Links)
Line 8: Line 8:
 
[http://elco.crsndoo.com/reprap/calibrate.html Script to generate calibrated G-code]<br />
 
[http://elco.crsndoo.com/reprap/calibrate.html Script to generate calibrated G-code]<br />
 
[http://projects.pelrun.net/ Pelrun's blog]<br />
 
[http://projects.pelrun.net/ Pelrun's blog]<br />
[http://technocraticanarchist.blogspot.com/ Forrest Higgs blog on RapMan'ed objects]
+
[http://technocraticanarchist.blogspot.com/ Forrest Higgs blog on RapMan'ed objects]<br />
 +
[http://blog.reprap.org/ RepRap blog]
  
 
== Cool Print Things (*.STL)==
 
== Cool Print Things (*.STL)==

Revision as of 20:49, 14 May 2010


QASlogo.png This page was developed by the Queen's University Applied Sustainability Research Group. QASlogo.png


General 3D Printing Links

G-code listing
Skeinforge wiki
Calibrating Skeinforge print settings with tested values for head speed and extruder rate
Script to generate calibrated G-code
Pelrun's blog
Forrest Higgs blog on RapMan'ed objects
RepRap blog

Cool Print Things (*.STL)

Mechanum Wheels thingi
Whistle with pea inside
Hand

Useful RapMan Links

Recovering from a RapMan print crash
RapMan print settings
Analyzing RapMan prints
PLA print settings for RapMan
User submitted RapMan manual notes
ABS print settings for RapMan
Some STL test parts from BFB

Guide to first Rapman steps and settings

"... Then manually extrude about half a meter of filament at the temperature you set in the G-code file. See if the plastic flows as planned, i.e. 5mm/second ... Always extrude at least 30 cm of plastic at high temperature (e.g. 248 for color ABS) before running the file. When we started printing from a "cold" situation without extruding some plastic before hand, no plastic came out at start and then the nozzle would get stuck in some mess... If you plan to print a larger object, e.g. 12cm long, then make the raft temperature higher than 235 or 238 (my standard setting). The plastic will warp more and therefor attempt to rip it off. I don't have any setting yet, but I'd go for a temperature of 240 or higher and a yet fatter raft, e.g. set M108 to S600.0. But don't blame me if you can't get it off the print bed. Play it incrementally :) ..."


Tony's blog with some skeinforge calibration comments

Mendel Links

Individual Mendel print files
Mendel build manual
Block/combined Mendel print files
Toronto RepRap users group

Wikis and Forums

BitsFromBytes (RapMan) Wiki member
BitsFromBytes (RapMan) Forum awaiting admin approval
RepRap Wiki member
RepRap Forum member
Thingiverse member