Main page
New page
Upload file
Help
Community portal
Recent changes
Talk
Contributions
Create account
Enable dark mode
Enable read mode
Log in
View history
What links here
Related changes
Page information
Editing
Updated Forestry Densiometer (Smartphone Capable)
(section)
From Appropedia
Warning!
You are not logged in.
Log in
or
create an account
to have your edits attributed to your username rather than your IP, along with other benefits.
Anti-spam check. Do
not
fill this in!
== Technical Specifications and Assembly Instructions == * This is a single-piece print that requires ~2.25 hours to print and ~34 grams of plastic at the recommended slicing settings * Recommended slicing settings include: ** Material Type: PLA ** Infill Density: 20% ** Infill Type: Grid ** Printing Temperature: 200 C ** Heated Bed: No ** Print Speed: 50 mm/s * There is no other necessary directions for print/assembly * Including drawings or pictures of the device at stage of assembly at minimum. ([[Special:UploadWizard|Upload]]) === Common Problems and Solutions === * The most common problem is adhesion to the print bed, as the part is a large rectangle. To combat this problem, I recommend laying down a thin layer of glue (or other adhesive) to a glass print bed. This should help avoid adhesion issues.
Summary:
Warning!
All contributions to Appropedia are released under the CC-BY-SA-4.0 license unless otherwise noted (see
Appropedia:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here! You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted material without permission!
Cancel
Editing help
(opens in new window)
This page is a member of 2 hidden categories:
Category:Pages with no lead text
Category:Pages with references but no references tag
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
OK
Discussion