Difference between revisions of "UTC Solar Distiller"

From Appropedia
Jump to navigation Jump to search
Line 110: Line 110:
Insulation is by far the most difficult material to choose. Many options are available, and we have not yet made a decision what material will be most appropriate when comparing cost, availability, and effectiveness. Some possible solutions:
Insulation is by far the most difficult material to choose. Many options are available, and we have not yet made a decision what material will be most appropriate when comparing cost, availability, and effectiveness. Some possible solutions:
  Note: Any flammable insulator may require additional measures to prevent fire.  
  Note: Any flammable insulator may require additional measures to prevent fire. *
  Fire protection means some type of sealing and/or chemical treatment of loose-fill insulation.  
  Fire protection means some type of sealing and/or chemical treatment of loose-fill insulation.  
  Insulation should have minimal or no contact with both liquid and vaporized water.
  Insulation should have minimal or no contact with both liquid and vaporized water.
Line 120: Line 117:
  2.5 ounces borax mixed with 2 cups boiling water [http://www.care2.com/channels/solutions/home/1651]
  2.5 ounces borax mixed with 2 cups boiling water [http://www.care2.com/channels/solutions/home/1651]
'''Possible Insulation Materials'''
'''Possible Insulation Materials'''
Line 149: Line 144:
It may be necessary to combine a solid insulator with some type of loose-fill [http://en.wikipedia.org/wiki/Thermal_insulation#Loose-fill_that_is_not_often_used_but_perfectly_acceptable_given_the_right_thickness]
It may be useful to combine a solid insulator with some type of loose-fill [http://en.wikipedia.org/wiki/Thermal_insulation#Loose-fill_that_is_not_often_used_but_perfectly_acceptable_given_the_right_thickness]
or spray-in-place [http://en.wikipedia.org/wiki/Thermal_insulation#Loose-fill_and_spray-in-place]
or spray-in-place [http://en.wikipedia.org/wiki/Thermal_insulation#Loose-fill_and_spray-in-place]

Revision as of 01:42, 8 August 2006

An ongoing project designed and implemented at Universidad Tecnològica de Coahuila in Parras de la Fuente, Coahuila México to provide safe drinking water purified by the process of solar distillation.

wikipedia:solar distillation

Please note this document is currently a work in progress. uncompleted sections are noted as appropriate by TBD.


Project Participants

Summer 2006:


Numerous different methods exist for purifying water, all with the same intended result: to obtain water that is safe for humans to drink, referred to as potable. Some of the most common methods of water purification are boiling, addition of chemicals (iodine or chlorine), reverse osmosis, and filtration. All of these methods are effective, but may require resources that are unavailable in some locations. For example, while it may be very difficult to obtain chemicals or maintain a fire in remote areas, sunlight is often a readily available resource useable for water distillation. This document is a proposal to implement a passive solar distillation system prototype as a working example of utilizing energy from the sun to provide safe drinking water for human consumption.

General Description

Passive solar water distillation is considered an appropriate technology because it operates on the same principles that produce rainfall, purifying water through a process of evaporation, condensation, and collection. Solar distillation could be considered a form of biomimicry because of its relation to the rain cycle and the [greenhouse effect]. The solar distillation process can be performed on brackish, salty water or from sources such as rain, municipal, well, or spring. By utilizing the plentiful energy of the sun to evaporate water, dissolved metals and minerals, such as arsenic, barium, cadmium, chromium, and lead are separated from contaminated water [1]. Distillation also removes salts and biological contaminants such as E.Coli[2].

A conventional solar distiller is a box with a glass roof, referred to as a glaze, set at and angle from the horizontal to ensure optimal sun exposure. This angle is roughly equal to the latitude of the location. The distiller faces south if in the northern hemisphere, north in the southern hemisphere[3]. Untreated water is routed into a holding basin inside the distiller. Radiation from sunlight penetrates the glass and heats the inside of the distiller, causing the water in the basin to evaporate. The absorption of higher frequency radiation heats the water and solar still internals. The glaze traps infrared re-radiation causing a greenhouse effect resulting in higher temperatures [4]. The evaporation process separates contaminants from the water and results in a thin condensate on the underside of the glass cover. The the condensed, distilled water then runs off the glass into a trough, and is transferred to a water storage container for domestic use. Contaminants and particulates remain in the basin and must be washed away periodically.

(TBD: diagrams)

Construction Plans

Scott Harris and Jeffrey M. Hinton, participants of the Parras 2005 program constructed a solar water distiller and provided a final analysis of their project on 5 August 2005. The unit they constructed is located in the laboratory at the Universidad Technologia de Coahuila, Parras Campus. This project provides a solid basis for further research and development of small scale water distillation in Parras. However, after reviewing their final analysis, construction infrastructure, and materials used, we propose some design changes and plan to research different building materials. Modifications include: substitution of the insulation material, floor coating, basin structure, and design of the collection trough. The intention is to improve upon the existing design, utilize more affordable, durable materials, and research additional methods for increasing efficiency. Portability is not a consideration with this prototype design. The materials and design chosen do not lend themselves to easy transport. The glaze is fragile, the wood veneer internal frame is frail, and the metal basin is not secured. This unit will only operate at the UTC campus, subsequent iterations of this design should consider portabilty issues.

Table of Material Substitutions

Function Current Material Possible Alternatives Justification Possible Issues
Insulation Styrofoam Lechugilla fiber, Wool, Clay/straw mixture [5], recycled denim, Perlite [Details], Fiberglass as a last resort. A natural insulator would be preferable, and the styrofoam tends to melts with heat Flammability, water absorption, R-Value, cost, availability, lifespan
Collection Trough PVC pipe metal, ceramic, wood The PVC melts from heat Heat resistance, Conductivity removing heat from system
Black coating for heat retention Spraypaint Ceramic tile, black woven tarp, tinted glass Spraypaint may be the only solution, but a more natural black coating would be preferable Chemical leeching, heat resistance, fragility
Untreated water basin Spraypainted galvanized metal Stainless steel, Ceramic Spraypaint and silicone caulking may contaminate water distillation process Difficulty obtaining high temperature black sealant. Finding basin of proper size
Internal frame Thin wood veneer Thicker wood with sturdier construction, or metal Veneer is too thin, lacks structural support Affordability, availability, weight, ease of color adhesion

Proposed Location

This passive solar water distiller experiment is intended for Universidad Tecnològica de Coahuila campus located on Madero Street, Parras, Coahuila. UTC has a student, faculty, and employee population of 205 people, comprising a continuous demand for potable water. The water demand is important because it directly affects the design of the distiller in respect to desired quantity of water output.

The public supply is the most likely source of water. Although municipal water has been given some treatment, it is not always potable. Municipal water is currently the easiest method of water aquisition. In the future a rainwater catchment system could be implemented. At this time, the location of the distiller on the UTC campus is undetermined pending investigation of the best possible placement. A flat and level area with direct access to water and sun is necessary. considerations must be taken to ensure it is not in a place where the glaze can be easily damaged by vandalism or accidental breakage. The system must be located in an area that facilitates easy access and maintenence.


Currently, the UTC purchases their drinking water from SierrAzul in 5-gallon jugs (19-litres) at a cost of approximately $1.40 USD ($14.50 pesos) each. (TBD: Buyback time). Potential benefits of implementing this system are reduced cost of water and self-sufficiency. The presence of this project at UTC may influence students to pursue additional education in solar technology, possibly taking the knowledge with them in their daily lives, and into the future.

If we successfully implement the solar water distiller at UTC, there may be increased potential for expansion and installation to other locations in Parras. Solar water distillation may apply to small systems for homeowner usage, as well as larger installations in businesses or agricultural locations.

Project Update: Week 5

Physical Progress

Week 4: Disassembly initiated. Melted components partially removed and inspected. These components include Styrofoam, PVC pipe, and plastic coating.

Proposed Materials

Currently in progress.


Insulation is by far the most difficult material to choose. Many options are available, and we have not yet made a decision what material will be most appropriate when comparing cost, availability, and effectiveness. Some possible solutions:

Note: Any flammable insulator may require additional measures to prevent fire. 
Fire protection means some type of sealing and/or chemical treatment of loose-fill insulation. 
Insulation should have minimal or no contact with both liquid and vaporized water.
A fairly inexpensive fire retardant and insect deterrant is 
2.5 ounces borax mixed with 2 cups boiling water [6]

Possible Insulation Materials

Material Justification Concerns Estimated R Value [7]
Cotton fiber from denim factory Locally available Possible toxic chemicals (dyes, etc), fire hazard. 3 to 3.8 (Cellulose)
[Perlite] - loose fill

[8] [9]

Common material, naturally occuring glass, hopefully available from [Parras Farm Stores]. High temperature tolerance. price, availability, possible water contamination 2.7
Vermiculite [10] Very similar to Perlite, fire resistant May contain asbestos [11] 2.13 to 2.4

It may be useful to combine a solid insulator with some type of loose-fill [12] or spray-in-place [13]

Water Basin

The water basin is fairly small, spraypainted black, and sealed with silicone glue. Some ideas for improvement:

  • Fabricate or purchasing a larger basin
    • Search for possible alternatives to metal basin
      • Reuse a dark colored sink basin
      • Fabricate a ceramic basin
      • Line current basin with tinted glass or dark ceramic tile
      The additional weight is acceptable for this prototype distiller due to the stationary design. Additionally, the water basin can be removed if transportation is necesary.
  • Purchase a second identical basin and place the two side by side
  • Remove spraypaint
    • Find an alternative non-toxic black paint, with high temperature tolerance.
    • If a metal trough is the only choice, research other darkening solutions such as patination, or staining.
  • Look into the possibility of using a wick system to draw untreated water into the still.

Collection Trough

This could be replaced with fabricated metal, ceramic, or another material with high temperature durability. Considerations should be taken regarding the conductivity of the material chosen.

Fasteners and sealant

Much of the exiting glue needs to be removed and replaced with sturdier fasteners such as brackets and screws. More research TBD.

Project Update: Week 8

Week 6

  • Implemented plumbing for water intake system including external storage bucket and basin float valve system.
  • Determined insulation to consist of perlite. Visited several local nurseries in town and found a nursery that can order bulk perlite.
  • Visited local construction stores for black high temperature silicone. Not available locally.
    • Instead purchased two small tubes of red high temperature caulking from Home Depot in Torreón.

Week 7

  • Finalized materials list
  • Went to Home Depot in Torreón to purchase materials
  • Proposed budget-to-date for distiller is $100.00 (US)
  • Money spent to date is $35.00 (US)
  • Ordered Perlite from nursery. Two large buckets are currently on order and should arrive Thursday 10/13. Because of a planned trip, they must be picked up Saturday 10/15.

Summary of Purchased Items:

Descripción Description Qty Cost (Pesos) Total
Cubeta Multiusos 5 Gal Bucket 1 $69.00 $69.00
Silicon Rojo Red Gasket Silicon 2 $28.50 $57.00
Valvula 3/4" 3/4" Valve 2 $38.50 $77.00
Union Por Manguera Hose union 3 $25.00 $75.00
Flotador #3 Por Tanque Toilet float valve 2 $17.91 $35.82
Spray Master Paint Spray Master Paint 1 $19.00 $19.00
Tapa Por Cubeta Bucket Top 1 $25.00 $25.00
Manguera Jardin 1/2" 3m 1/2" Garden Hose 3m 1 $16.80 $16.80
1 Hoja Triplay 9mm One Sheet 3-Plyood 9mm 1 $290 $290
1 Hoja Triplay 60cm x 1.80 cm One Sheet of 9mm 3-Plyood 1 $109 $109
Barrotitos 1x2x1.46 Misc 1"x2" 2 $10 $20
Pijas 1/2" Screws 80 $.28 $28
Pijas varios various screws 50 $.35 $17.30
Cinta Medir 3m 3m Measuring Tape 1 $30 $30
Collecionador de agua metale - hecho de encargo Metal water collector - custom built 1 $95 $95
Total $935.92
Estimated US Dollars (11.8:1 Pesos:Dollar) $79.32

Automatic water intake system

Implemented Sunday, 9 July 2006

Project Update: Week 10



Day 1

Cloudy in the morning. Rain storm later in the day.

  • The entire distiller got wet and the underside is saturated.
  • No water was evaporated.

Day 2

  • Finished setup in the morning.
    • Moved the distiller to face south and maximize sun exposure. Because of this, the system is no longer in reach of the nearest spigot and the storage bucket had to be filled manually.
  • The glaze was not properly sealed until 5:00 pm.
    • Water constantly escaped and no evaporation occured.
  • After the glaze was sealed, evaporation began immediately.
    • About 10ml of water was successfully distilled and recovered.
    • A significant amount of water was lost because the plastic tube used to catch water drops and deposit them in the collector was not completely sealed to the glass. Additionally, the circular shape of the tube may be allowing for water droplets to slip past and fall on the wood frame at the bottom of the glaze.
    • Due to other commitments such as class and lunch, temperature readings were sporadic. All temperature data had to be thrown out because the system was unsealed and not retaining heat.

Day 3

  • Sealed the bottom of the water basin to prevent leakage
    • The basin is not properly sealed in the lower corners and continues to leak.
  • Sealed hose connection to the basin using teflon tape.
  • Added more gasket seal to the rubber hose used to drip water into the trough.
    • Cut the hose in half to decrease the chance of droplets falling past the collection trough.
    • Successfully increased the probability of distilled water falling into the trough.
  • Completely sealed the glaze using high temperature silicon gasket seal and duct tape.
    • Metal tape would be a better choice, but after 3 unsuccessful hours of searching Parras, duct tape was the only choice.
  • Distilled a very small amount of water in the remaining daylight hours.

Day 4

  • Full day of sunlight with some cloud cover
  • By the end of the day, approximately 500ml of water was distilled.
    • Appearance of distilled water:
      water is clear, and smells like plastic
    • Taste test:
      Jeff Kinzer and Eddie Duran were the subjects. The consensus is that the water tastes terrible, like plastic with a cotton aftertaste.
  • Problems encountered:
    • The untreated water basin continued to leak, causing separation and warping of the wood in the front bottom area of the distiller.
    • While removing the glaze to move the unit into storage, one corner of the glass broke.



  1. Connect hose from water source to bucket
    • Alternatively, connect the hose directly to the system. The bucket is solely to provide temporary storage if the water source must be disconnected and used for another purpose.
  2. Turn on water and monitor basin and bucket as they fill
  3. Wait patiently
  4. Change clean water receptacle when full


  • wash untreated water basin periodically
  • clean glaze
  • check for hose leaks
  • cover with tarp if it rains
  • Replace float valves as necessary
  • Check glaze seals
  • Check hose connections for leaks, repair if necessary

Possible Points of Failure

  • Water collecting in the bottom of the system
  • Degradation of the glaze seal, which will result in loss of efficiency and increase the possibility of contamination from outside sources.
  • hose connection leakage
  • degradation of the wood frame from water leakage and exposure to the elements

Future Changes and Upgrades

Fix thread mismatch.
The float valves use a fine thread, but hose connectors use coarse thread. This mismatch causes unreliabilty of connections, and constant leakage. Currenty several windings of teflon tape are in place to stop the leakage. The best solution is a thread adapter or purchasing fine thread hose connectors.
Construct the system out of something other than wood, especially not particle board.
Metal or cement may hold up better than wood when exposed to rain, wind, and high amounts of sun.
Use a different method of depositing condensed water droplets in the collection trough. The tube is not completely effective.
One possible solution is a curved piece of plastic running from the bottom edge of the glaze diagonally into the collection trough.
Install easy hose connect/disconnect in the rear of distiller.
The system should be easy for anyone to connect or disconnect.
Completely seal perlite insulation from the water chamber.
Currently silica powder from the crushed perlite is contaminating the entire water evaporation chamber.


What Succeeded

  • Replacement of the internal frame
  • the addition of black plastic reused from defective water storage tanks, as a replacement for spraypaint
  • Float valve water intake system
  • Perlite insulation as a replacement for styrofoam
  • Having access to tools, help and transportation thanks to Angela's host, the Madero family. Without them this project would not have been possible to implement.

What Failed

  • water input systems
  • bucket with float valve is unnecessary
    • However, the extraneous bucket has been essential for testing because we do not have a long enough hose to reach from the nearest spigot to the testing site.
    • The extra materials also provide a replacement float valve and extra hose parts for future maintenence.
  • Thread mismatch with hose unions -- fine thread on float valve, coarse thread on the hose connector.
  • hose coupling leaks (currently using teflon tape and drip catch)
  • The water basin leaks, attempts to seal it were unsuccessful.
  • Insulation is not completely sealed. Perlite enters the distillation chamber and silica particles settle in the untreated water basin.
  • The glaze is very difficult to seal because the box frame is warped and is continuing to deform.
    • Attempts to seal the glaze with high temperature silicone gasket seal were partially successful.
    • More silicone is required to seal the unit than we were able to purchase.
    • Metal tape would suffice for sealing the glaze. Finding the tape in Parras is difficult, and we were not able to encounter any. More research should be done regarding the safety of using aluminum tape in possible contact with the distilled water.


In progress. For now, use inline references.

How did you use these references (i.e. citing) and please describe the pertinent material from the reference here.