Line 36: | Line 36: | ||
==== Assembly ==== | ==== Assembly ==== | ||
* For mounting, simply place 6 mm bolts into holes on outside flanges and use nuts to fasten to whatever mount you desire. | * For mounting, simply place 6 mm bolts into holes on outside flanges and use nuts to fasten to whatever mount you desire. | ||
==== Common Troubleshooting ==== | |||
* To remain accurate and objective, clean grid lines are a necessity. Proper calibration is a must, along with with minimal peel up. If peel up occurs, this may be limited with application of a glue stick to the print bed or use of a heated print bed. | |||
== Estimated Savings == | == Estimated Savings == | ||
* On the low end, a densiometer typically costs around $100. Thus, this print at its highest cost with attachments renders a savings of 97.15%. | * On the low end, a densiometer typically costs around $100. Thus, this print at its highest cost with attachments renders a savings of 97.15%. |
Revision as of 15:26, 9 December 2014
Simple Forest Densiometer
Project Developed by Brian Swanson User:Btswanso
Abstract
- The forest densiometer provides a practical, objective way to measure the density of tree canopy. This tool removes all guess work out of determining canopy cover, which is a very useful metric for foresters and construction companies looking to predict how much foliage and tree removal must be done in an specified area.
- Files may be downloaded off of the Thingiverse here: Files
- Or, the STL file is available here: File:Densiometer Mountable 2.stl
-
Printed Densiometer
Bill of Materials
- The essential material needed to create this densiometer is 44 grams of PLA plastic. At an average price of $25 per kilogram, this part costs $1.10.
- This part has optional mounting 6 mm bolts. A pair of these approximately cost $1.50. A pair of matching 6 mm nuts will add an additional 25 cents to the bill.
Tools Required for Fabrication
- One 3-D printer capable of printing a 102 mm by 102 mm by 20 mm component.
Required Skills and Knowledge
- Ability to operate a 3-D printing device.
Printing and Assembly
Printing
- The print is a single component that takes approximately one hour and fifteen minutes to print. It requires approximately 44 grams of plastic.
Assembly
- For mounting, simply place 6 mm bolts into holes on outside flanges and use nuts to fasten to whatever mount you desire.
Common Troubleshooting
- To remain accurate and objective, clean grid lines are a necessity. Proper calibration is a must, along with with minimal peel up. If peel up occurs, this may be limited with application of a glue stick to the print bed or use of a heated print bed.
Estimated Savings
- On the low end, a densiometer typically costs around $100. Thus, this print at its highest cost with attachments renders a savings of 97.15%.