The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 171: | Line 171: | ||
Once the print is complete, if printing with PLA, wait until the build platform cools down, and some popping sounds come from the print, and pull the print off and turn the printer and fans off using the switch mounted on the left side of the printer. If the print doesn't come off easily, then wait some time for the plastic to cool down. | Once the print is complete, if printing with PLA, wait until the build platform cools down, and some popping sounds come from the print, and pull the print off and turn the printer and fans off using the switch mounted on the left side of the printer. If the print doesn't come off easily, then wait some time for the plastic to cool down. | ||
<br> | <br> | ||
If printing with | If printing with ABs, pull the print almost immediately after the print is done. | ||
===Troubleshooting=== | ===Troubleshooting=== |