The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 7: | Line 7: | ||
# Print with inert gas for GMAW 3DP [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # Print with inert gas for GMAW 3DP [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# '''Print with inert gas injected into plastic to reduce weight''' [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # '''Print with inert gas injected into plastic to reduce weight''' [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# Print with inert gas injected into metal to reduce weight [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # Print with inert gas injected into metal to reduce weight [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# Print with inert gas injected into ceramic to reduce weight [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # Print with inert gas injected into ceramic to reduce weight [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) |