Editing Obvious 3D printer technology based on 20. Continuity of useful action

{{777 notice}}

 {{TRIZ-3D}}
# design prints to reduce travel time [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:49, 1 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:54, 1 December 2015 (PST)
# keep motors running at full speed [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:52, 1 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:54, 1 December 2015 (PST)
#use multiple hot ends to keep printing continuous [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:52, 1 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:54, 1 December 2015 (PST)
# quick automated calibration check at start of printing to ensure quality prints [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 06:59, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:06, 3 December 2015 (PST)
# force sensors in hot end for auto-leveling and calibration [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 06:59, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:06, 3 December 2015 (PST)
# bulk group of printers printing simultaneously [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 06:59, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:06, 3 December 2015 (PST)
# '''Running a current through connecting rods so printer knows when printer head is disconnected and can stop printing''' [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:05, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:06, 3 December 2015 (PST)
# continuous printing prevents jamming of hot end [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:10, 3 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:48, 3 December 2015 (PST)
# stores extra energy to conserve power [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:12, 3 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:48, 3 December 2015 (PST)
## flywheel
# insulated hot end-less energy, faster printing [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:16, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:17, 3 December 2015 (PST)
# automatic adhesion (gluing or otherwise) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:19, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:19, 3 December 2015 (PST)
# automatic starting of next part in Queue[[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:19, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:19, 3 December 2015 (PST)
# SMS text when part is done [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:19, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:19, 3 December 2015 (PST)
# remote monitoring via phone app [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:19, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:19, 3 December 2015 (PST)
# dual size heads, large for infill, small for border [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:21, 3 December 2015 (PST)
# printer sleep mode to save power when not printing [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:38, 3 December 2015 (PST)
# enclosed printing space for fumes, safety [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:46, 3 December 2015 (PST)

# '''Auto bed scraper when print finishes''' [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:53, 1 December 2016 (PST)


# Automate removal and start of new prints [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Modify fan to not activate while the hot end is heating up [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Auto leveling [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Auto calibration [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# '''Automate loading and unloading of new rolls of filament [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Add monitor of print from a distance [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Add alarms for common failures [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Add recyclebot automation for failed prints [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Create controlled environment to reduce energy for maintaining hot end temp [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Increase travel speed and acceleration for travel [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Utilize dual end extruder so larger filament can be used with infill and finer filament can be used for walls [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Utilize multi-color filament extruder/hot end for printing in many different colors at once
# Make hot end lighter [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Use faster motors for printing [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Add control of print from a different location [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# '''Add multiple extrusion heads for simultaneous printing of the same part [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# '''Link multiple printers together for simultaneous printing [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Add multi-use print head (ex. router/laser cutter in addition to plastic extruder) [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Make very smooth and lubricated connecting rod ends & travel rods [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Automate application of lubricant [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Change location of extruder motor & filament for less energy required to extrude [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Make printers specifically sized to reduce travel time [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Filament diameter checker to reduce possibility of printing errors [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# '''Alarm for when filament is running low [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Auto-optimize placement of parts for faster printing in multi-part printing [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Use factory-type model for assembly (When assembling in large groups have one person do specific assembly step and then give to next person) [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)
# Optimize slicer to place maximum number of parts on build plate possible [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:13, 4 December 2018 (PST)



# maximize print speed[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# robot arm to remove print and clean bed [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# multi filament print head [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# self lubricating rods[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# self lubricating connection ends [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# some way to absorb energy from the print head as it changes directions and re apply it in the new direction [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# trip light  to detect print failing [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# rod connection sensor [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# hot end vibration sensor [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# bed adhesion sensor [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# power failure sensor [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# power surge sensor[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# assembly robot for printers [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# dual powered printer, battery and wall [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# filament loader [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# filament sensor [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# fusing filament machine, connects the end of one spool to the next [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)
# Light sensor on print head to detect when not parallel to print bed [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 4 December 2018 (PST)

{{Page data}}

[[category:4777 TRIZ 3D printers]]