| Latest revision |
Your text |
| Line 32: |
Line 32: |
| [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:39, 4 December 2018 (PST) | | [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:39, 4 December 2018 (PST) |
|
| |
|
| # Use "teeths" in between layers to increase adhesion [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use "teeths" in between layers to increase adhesion |
| # Use the hotend carriage as a milling machine to combine additive and subtractive manufacturing at the same time [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use the hotend carriage as a milling machine to combine additive and subtractive manufacturing at the same time |
| # Use laser to harden/sharpen metal parts [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use laser to harden/sharpen metal parts |
| # Use polishing tool to apply mechanical ironing to layers [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use polishing tool to apply mechanical ironing to layers |
| # Design a printing conveyor (conveyor belt instead of printing beds) [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Design a printing conveyor (conveyor belt instead of printing beds) |
| # Use dynamically updated gcode, so the designer could work on the part, which is already printing [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use dynamically updated gcode, so the designer could work on the part, which is already printing |
| # Use movable bed [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use movable bed |
| # Use pre-printed part in order to assemble right on the solidifying layer [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use pre-printed part in order to assemble right on the solidifying layer |
| # Use pre-melted filament for high speed printing [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use pre-melted filament for high speed printing |
| # Use nozzle diafragm to adjust nozzle size on-the-fly [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use nozzle diafragm to adjust nozzle size on-the-fly |
| # Create parabolyc coordinates [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Create parabolyc coordinates |
| # Add extra dimension (extra coordinate axis) [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Add extra dimension (extra coordinate axis) |
| # Add actuated joints to metal rods for delta printers [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Add actuated joints to metal rods for delta printers |
| # Add motors to change xyz axes directions on-the-fly [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Add motors to change xyz axes directions on-the-fly |
| # Add vibration (motor with excentric load) to improve quality [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Add vibration (motor with excentric load) to improve quality |
| # Use printing foam which preserve its form and solidifying over time [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use printing foam which preserve its form and solidifying over time |
| # Use laser cutter as a nozzle addition [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use laser cutter ass a nozzle addition |
| # Use magnetic field to allow "antigravity" prints [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use magnetic field to allow "antigravity" prints |
| # Print in vacuum [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Print in vacuum |
| # Print under pressure [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Print under pressure |
| # Use thermal chamber to apply temperature for gradual print evolution [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # Use thermal chamber to apply temperature for gradual print evolution |
| # Inject flamable threads to layer in order to remove part of layer later [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST) | | # |
| # Add steel/metal mesh threads in between layer [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST)
| |
| # Inject metal components during printing with low temperature (it could increase strength in regular temperature range) [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST)
| |
| # Use water/CO2 ice as a support [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 07:49, 4 December 2018 (PST)
| |
|
| |
|
|
| |
|
