High Temperature 3D Printer for Open Source Hardware Enterprise
Senior Design project developed by Aubrey Woern and Daniel Scsavnicki
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Objective
To provide a low cost, open source solution for 3D-printing in high performance materials such as PEEK (polyether ether ketone), PEI (polyetherimide) and PC (polycarbonate), to increase the availability to engineers, makers and medical professionals to print in these materials.
Bill of Materials
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
- Allen Wrench (For M5 and M3 Bolts)
- Soldering Iron and Solder