Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

OSHE High Temperature 3D Printer

From Appropedia
Revision as of 11:40, 14 December 2018 by Alwoern (Talk | Contributions) (Abstract)

Jump to: navigation, search

OSHE HT Printer.jpg

High Temperature 3D Printer for Open Source Hardware Enterprise

Senior Design project developed by Aubrey Woern and Daniel Scsavnicki
Status
This OSAT has been designed but not yet tested - use at own risk.
This OSAT has been prototyped.

You can help Appropedia by contributing to the next step in this OSAT's status.

Objective

To provide a low cost, open source solution for 3D-printing in high performance materials such as PEEK (polyether ether ketone), PEI (polyetherimide) and PC (polycarbonate), to increase the availability to engineers, makers and medical professionals to print in these materials.

Bill of Materials

Tools needed for fabrication of the OSAT

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. Allen Wrench (For M5 and M3 Bolts)
  3. Soldering Iron and Solder

Skills and Knowledge Necessary to Make the OSAT

Technical Specifications and Assembly Instructions

Common Problems and Solutions

Cost savings

Case Study Prints

References