The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 17: | Line 17: | ||
It is just for Delta so it generally looks like triangular prism. The biggest difference of this design with others is the hot end brace. The hot end brace in this design is not like a semi-circle but consists of three small arcs. These three arcs is not thick so they are flexible and can provide entrance for the hot end. It is necessary to make some supporters for some parts. In this design, the magnet holders, braces and top have 0.6 mm of thickness supporters. It should be noted that the thickness of supporter should be small but larger than nozzle size. For the nozzle size of 0.5 mm, if the thickness of supporter is small than 0.5 mm, the supporter wouldn't show up; if the thickness of supporter equals 0.5 mm, just some of supporters show up, so the thickness of supporters is 0.6 mm in this design. | It is just for Delta so it generally looks like triangular prism. The biggest difference of this design with others is the hot end brace. The hot end brace in this design is not like a semi-circle but consists of three small arcs. These three arcs is not thick so they are flexible and can provide entrance for the hot end. It is necessary to make some supporters for some parts. In this design, the magnet holders, braces and top have 0.6 mm of thickness supporters. It should be noted that the thickness of supporter should be small but larger than nozzle size. For the nozzle size of 0.5 mm, if the thickness of supporter is small than 0.5 mm, the supporter wouldn't show up; if the thickness of supporter equals 0.5 mm, just some of supporters show up, so the thickness of supporters is 0.6 mm in this design. | ||
[[Image:3 fans hot end holder-stl | [[Image:3 fans hot end holder-stl|center|400px.PNG]] | ||
==Printing== | ==Printing== | ||