Main page
New page
Upload file
Help
Community portal
Recent changes
Talk
Contributions
Create account
Enable dark mode
Enable read mode
Log in
View history
What links here
Related changes
Page information
Editing
Honey Processing (Practical Action Technical Brief)
(section)
From Appropedia
Warning!
You are not logged in.
Log in
or
create an account
to have your edits attributed to your username rather than your IP, along with other benefits.
Anti-spam check. Do
not
fill this in!
== Quality Assurance == Honey is preserved because of its high sugar content (or conversely its low moisture content), which prevents micro-organisms (bacteria, yeasts and moulds) from growing in it. Despite this, it must be handled hygienically, and all equipment must be properly cleaned (see below). The aroma and taste of honey are its most important quality characteristics, but honey is often judged according to its colour. The colour of honey depends mainly on the source of the nectar. Usually dark-coloured honeys have a strong flavour whereas pale honeys have a more delicate flavour. Generally light-coloured honeys are more highly valued than dark products. Some honeys have a high pollen content, which makes them appear cloudy, and this may be considered as lower quality by some customers. The main causes of loss in quality of honey are: # An increase in moisture content - too much water in honey (greater than 19-20%) causes it to ferment. Honey is 'hygroscopic', meaning that it will absorb moisture, and all honey processing equipment must therefore be completely dry. Honey should also be processed as soon as possible after removal from the hive to prevent it absorbing moisture from the air, especially in humid climates. In areas with a very high humidity it can be difficult to produce honey of sufficiently low water content. # Development of HMF (Hydroxymethylfurfural). This is a break-down product of fructose (one of the main sugars in honey) that is formed slowly during storage but very quickly when honey is heated. Colour can also be an indicator of quality because honey becomes darker during storage and heating. The amount of HMF present in honey is used as a guide to the age of the honey and/or the amount of heating that has taken place. Some countries set an HMF limit for imported honey. HMF is measured by laboratory tests and technical advice from a Bureau of Standards should be sought if export is being considered. # Contamination by insects. Honey processing is a sticky operation, and the sugar in honey attracts ants, cockroaches and flying insects. Careful protection is needed at all stages of processing, including insect screens on doors and windows to prevent contamination by insects. All honey residues on equipment should be removed by proper cleaning to prevent them attracting insects. The presence of any other contaminations (e.g. particles of wax, parts of bees, splinters of wood, dust etc.) make the honey very low value. === A note on granulation === Glucose is one of the main sugars in honey and when it crystallises (i.e. it changes from a liquid to a solid), the liquid honey also becomes solid (or granulated). Depending on the source of the nectar collected by bees, some types of honey are more likely to granulate than others, but almost all honey will granulate if its temperature falls sufficiently. Granulation is a natural process and there is no difference in nutritional value between solid and liquid honey. Although there is obviously a difference in the texture between liquid and granulated honey, there is no difference in the flavour or other quality characteristics. Some customers prefer granulated honey, and if liquid honey is slow to granulate, the addition of 20% finely granulated honey will cause it to granulate.
Summary:
Warning!
All contributions to Appropedia are released under the CC-BY-SA-4.0 license unless otherwise noted (see
Appropedia:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here! You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted material without permission!
Cancel
Editing help
(opens in new window)
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
OK
Discussion