| Line 13: | Line 13: | ||
== Bill of Materials== | == Bill of Materials== | ||
* 2 x [http://www.appropedia.org/User:Patrick_Gilland|Printed Hemostat] | * 2 x [http://www.appropedia.org/User:Patrick_Gilland| Printed Hemostat] | ||
* 1 x 3mm by 10mm long** | * 1 x 3mm by 10mm long** | ||
* 1 x 3mm nut** | * 1 x 3mm nut** | ||
**Nut & bolt dimensions will change based on customization of print. | **Nut & bolt dimensions will change based on customization of print. | ||
Revision as of 15:58, 6 December 2018
Hemostats
Project developed by User:Patrick Gilland
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
- Hemostats are a medical alternative to clamps. They are especially useful when the user only has one hand available or access to something from one side. This fully customizable 3-D printed option makes hemostats available to doctors in remote locations at a low cost.
- Picture of completed print using your printer
Bill of Materials
- 2 x Printed Hemostat
- 1 x 3mm by 10mm long**
- 1 x 3mm nut**
- Nut & bolt dimensions will change based on customization of print.