Line 11: | Line 11: | ||
# Picture of completed print using your printer [[Image:Hemostat.jpg|200px|right]] | # Picture of completed print using your printer [[Image:Hemostat.jpg|200px|right]] | ||
== Bill of Materials== | |||
* 2 x [http://www.appropedia.org/User:Patrick_Gilland|Printed Hemostat] | |||
* 1 x 3mm by 10mm long** | |||
* 1 x 3mm nut** | |||
**Nut & bolt dimensions will change based on customization of print. |
Revision as of 15:58, 6 December 2018
Hemostats
Project developed by User:Patrick Gilland
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
- Hemostats are a medical alternative to clamps. They are especially useful when the user only has one hand available or access to something from one side. This fully customizable 3-D printed option makes hemostats available to doctors in remote locations at a low cost.
- Picture of completed print using your printer
Bill of Materials
- 2 x Hemostat
- 1 x 3mm by 10mm long**
- 1 x 3mm nut**
- Nut & bolt dimensions will change based on customization of print.