(Created page with "'''''' == Lamps == For now you must turn the lamps on manually on the computer by checking the two boxes that say "UV Lamp" *Click start button *Wait for the machine to se...") |
(→Export) |
||
Line 29: | Line 29: | ||
Raw spectrum file | Raw spectrum file | ||
== External links == | == External links == |
Revision as of 15:47, 6 June 2014
'
Lamps
For now you must turn the lamps on manually on the computer by checking the two boxes that say "UV Lamp"
- Click start button
- Wait for the machine to set up
Cubettes
The reference cubette is the one that is farthest away from the front of the machine.
- Located near the back of the UV chamber.
- A beam of light will be split into two beams
- These beams will shine through your sample and a reference then compare the two wavelengths
The sample cubette should be placed in the sample cubette holder
- The sample should be taped as flat as possible against the cubette's outer layer
- do not tape sample to the inside of the cubette
- [[]]
Idle
1. Auto zero the machine by pressing autozero
2. Put samples into respective places
3. Hit start
Export
XY data by column
Raw spectrum file
External links
- []
[[Category:]] [[Category:]]